TI中文支持网
TI专业的中文技术问题搜集分享网站

标签：TMS320f28034

第5页
TMS320F28034: DSP通电后，外部晶振的时钟信号稳定要10s以上，并且时钟信号的振幅和正常的比较明显偏小，更换晶振后现象相同，更换DSP后问题就消失。After the DSP is powered on, the clock signal of the external crystal oscillator is stable for more than 10s, and the amplitude of the clock signal is obviously smaller than t-TI中文支持网
C2000™ 32位实时 MCU

TMS320F28034: DSP通电后，外部晶振的时钟信号稳定要10s以上，并且时钟信号的振幅和正常的比较明显偏小，更换晶振后现象相同，更换DSP后问题就消失。After the DSP is powered on, the clock signal of the external crystal oscillator is stable for more than 10s, and the amplitude of the clock signal is obviously smaller than t

Yongsong Lyu阅读(143)赞(0)

Part Number:TMS320F28034 生产线生产的产品出现2例异常现象，我们总共生产了约1万多台。 There are two abnormal phenomena in the products produced by the...

热门标签

ECTE (3265)#希望得到TI的工程师回答 (1566)C2000WARE (918)DSP (853)希望得到TI工程师回答# (853)盼望能得到TI的人回答 (753)UniFlash (751)TMS320F28335 (750)电源管理 (748)TMS320C6678 (720)【紧急+重要】 (703)技术询问 (691)cc1310 (618)TDA4VM (612)电源 (599)Controlsuite (576)AWR2243 (531)6678 (530)AWR1642 (516)电池管理 (495)【紧急】+重要 (492)sysbios (486)AM5728 (486)CC2640R2F (448)AM3352 (446)#DCA1000EVM (432)放大器 (417)TMS320C6748 (410)bq40z50 (403)28335 (400)

热门文章