DVI驱动芯片
Other Parts Discussed in Thread:TFP410 请问一下TI有没有DVI-D DUAL LINK的发送器相应的解决方案? Kailyn Chen: 您好,TFP410是一款DVI transmitter,但是它...
Other Parts Discussed in Thread:TFP410 请问一下TI有没有DVI-D DUAL LINK的发送器相应的解决方案? Kailyn Chen: 您好,TFP410是一款DVI transmitter,但是它...
Part Number:CDCE913 Hi, Support Team 目前我們客戶有用一顆CDCE913的 I2C Clcok Generator 客戶用小轉板手工焊接IC,再利用排針(杜邦線)連到I2C Programmer燒錄器 然...
Part Number:TVP5150AM1Other Parts Discussed in Thread:TVP5150, TVP5151 您好,感谢支持。 基本状态:模拟信号输入到引脚正常、电源正常、晶振频率正常,DATA7脚极性与DA...
Part Number:DP83826E Can the address of PHY be configured as 000(0x00) when in basic mode?Will it conflict with an addre...
Part Number:LMK5C33216EVMOther Parts Discussed in Thread:LMK5C33216 1-PPS输入对应的配置寄存能不能提供1份HexRegisterValues.txt,开发板没有1-PP...
Part Number:TCAN1145-Q1 目前设计INH引脚经100K和680K电阻分压后连接电源芯片的使能引脚,想请教一下当CAN 收发器进入休眠状态后,INH引脚由Vsup电压变为高阻态,那它电压变化到0所需要的时间。同样的,当C...
DS90UB983 datasheets and ref document can mail to me? Kailyn Chen: Sorry, DS90UB983 is NDA product and there is no reque...
Part Number:DS90UB949-Q1EVM 每次再上电就需要再次运行py脚本,过于麻烦。能固化配置到评估板里面去吗? Kailyn Chen: 您好,您的问题和https://e2echina.ti.com/support/in...
Part Number:LMX2820 1. Write R0 with FCAL_EN = 1,then Write R0 with FCAL_EN = 0 There needs to be a delay between the tw...
Part Number:LMX2492 I connected LMX2492 to an external VCO, and loop filtering adopted the fourth-order passive form. Th...