TI中文支持网在对程序进行疲劳测试时，编译器总是很频繁的出现以下错误：
674X_0: Error: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 5.1.232.0)C674X_0: JTAG Communication ErrorC674X_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that youreset the emulator before you connect and reload your program before you continue debugging
C674X_0: Power Failure on Target CPUC674X_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that youreset the emulator before you connect and reload your program before you continue debugging
请问是我仿真器的问题，还是程序内存的问题，用的是XDS200ISO仿真器
Shine：
板子是自己的板子吗？如果有demo板的话，可以在demo板上跑个例程看是不是仿真器的问题。
Shine：
板子是自己的板子吗？如果有demo板的话，可以在demo板上跑个例程看是不是仿真器的问题。
