TI中文支持网尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
Johnson Chen1：
使用的F28035控制卡是带隔离的吗？如果是带隔离的话，是不能用外置仿真器的。
尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
rookiecalf：
SEED XDS510PLUS驱动安装目录只能是ccs_base，安装的时候别选错了。
另外这款只支持到CCS5.x，6以上不支持。
以前使用的时候，test从来没成功过，但是可以使用。
尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
ming chen3：
隔离的28035-Controlcard上集成JTAG隔离电路，自带USB调试接口。
不带隔离的28035-Controlcard上不带JTAG隔离电路，也不带USB。但高压套件底板带隔离电路。
尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
Yu Cao：
回复 Johnson Chen1:
不带隔离的。
尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
Yu Cao：
回复 rookiecalf:
test没成功，使用中没有影响吗？
尊敬的德州仪器技术人员，
我在调试阶段想用外接仿真器（SEED XDS510PLUS）方式链接我的controlcard 28035，但是链接不上，想问下我该如何处理？
按照High Voltage Motor Control and PFC (R1.1) Kit Hardware Reference Guide说明我做了以下操作：
Jumper set on [M3]-J2
Jumper set on [M3]-J5
[M3]-JP1 USB connection
现在当我检测链接时，我的test connection显示
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is not generated by TI's USCIF driver or utilities.
The USCIF driver and utilities use the range from -2 down to -999
The value is '+134' (0x00000086).
The title is unavailable.
The explanation is unavailable.
[End]
曹玉
Yu Cao：
回复 ming chen3:
我的这款不带隔离
