TI中文支持网应该是在我修改了某个变量的存储段以后，我的工程就突然出现的大量waring，但是可以编译成功，大致有两类waring，请问是什么原因引起的。
warning: Section ".bss" requires a STATIC_BASE relative relocation, but is
located at 0x008278b8, which is probably out of range of the STATIC_BASE.
STATIC_BASE is located at 0x00800200. Might be required to correct
placement of ".bss" so it lies within 0x8000 of the STATIC_BASE.
"D:\ccs\pdk_C6678_1_0_0_9_beta2\packages\ti/csl/csl_edma3Aux.h", line 162: warning: relocation from function "Edma3LL2toDDR3set" to symbol "hChannel"
overflowed; the 16-bit relocated address 0x9dc2 is too large to encode in
the 15-bit unsigned field (type = 'R_C6000_SBR_U15_W' (13), file =
"./EDMAset.obj", offset = 0x00000580, section = ".text")
"src/intc/_csl_intcCombEventDispatcher.c", line 169 (approximate): warning: relocation from function "_CSL_intcEvent3Dispatcher" to symbol
"_CSL_intcEventOffsetMap" overflowed; the 16-bit relocated address 0x9dc8 is
too large to encode in the 15-bit unsigned field (type = 'R_C6000_SBR_U15_W'
(13), file =
"D:\ccs\pdk_C6678_1_0_0_9_beta2\packages\ti\csl\lib\ti.csl.intc.ae66<_csl_in
tcCombEventDispatcher.oe66>", offset = 0x00000128, section =
".text:csl_section:intc:_CSL_intcEvent3Dispatcher")
warning: output file "PROCESS.out" cannot be loaded and run on a
target system
Phyllis Xu：
您好！
这是CCS在link过程遇到的警告。我看到warning信息中提到，定义的段（例如.bss）没有放到STATIC_BASE的memory中，即没有放到起始地址为0x00800200的memory中。
我建议您可以把.cmd文件发给我check一下。
非常感谢！
Richard Zhang：
回复 Phyllis Xu:
你好！CMD内容如下-c-heap 0x2000-stack 0x2000
MEMORY{ VECTORS: origin=0x00800000 length=0x00000400 LL2MEM: origin=0x00800400 length=0x0007FC00 MSMCRAM: origin=0x0C000000 length=0x00400000 DDR3RAM: origin=0x80000000 length=0x10000000 DDR32RAM: origin=0x90000000 length=0x10000000}
SECTIONS{ .csl_vect > VECTORS .text > LL2MEM .data > LL2MEM .fasttext > LL2MEM .cinit > LL2MEM .bss > LL2MEM .const > LL2MEM .far > LL2MEM .switch > LL2MEM .sysmem > LL2MEM .cio > LL2MEM .heap > LL2MEM .fardata > LL2MEM .neardata > LL2MEM .rodata > LL2MEM .INRAM > LL2MEM .MSRAM > MSMCRAM .EXRAM > DDR3RAM .2EXRAM > DDR32RAM .stack > LL2MEM}现在程序链接的时候还是会有warning，如图。
out文件测试软件仿真无问题，硬件执行是否会像warning说的不能执行呢?
