TI中文支持网如题，使用flash加密功能后 断电，再上电，板子就连不上了，具体的错误码如下：
Error connecting to the target:
Error 0x80000200/-1041
Fatal Error during: OCS,Device driver: Problem with the Emulation Controller.
It is recommended to RESET EMULATOR. This will disconnect eachtarget from the emulator. The targets should then be power cycled
or hard reset followed by an emureset and reconnect to each target.
查了好多资料，都没有解决，请大家帮助，谢谢！
shicheng Zhang：
PS：另外声明，加密的密码绝对不是全零，因为知道全零会锁死芯片！！！
如题，使用flash加密功能后 断电，再上电，板子就连不上了，具体的错误码如下：
Error connecting to the target:
Error 0x80000200/-1041
Fatal Error during: OCS,Device driver: Problem with the Emulation Controller.
It is recommended to RESET EMULATOR. This will disconnect eachtarget from the emulator. The targets should then be power cycled
or hard reset followed by an emureset and reconnect to each target.
查了好多资料，都没有解决，请大家帮助，谢谢！
mangui zhang：
回复 shicheng Zhang:
请参考一下解决办法
http://www.deyisupport.com/question_answer/microcontrollers/c2000/f/56/t/69538.aspx
将boot 引脚配置为Branch to check boot mode，然后再连接仿真器。
