TI中文支持网我在连接6678的开发板时，上电后，指示灯显示很正常，但是无法连接仿真器，测试连接时，会报错：
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
我在设备管理器里面也没有看到blackhawk的标识。
请问这是怎么回事，我前两天连接时还没有问题，怎么突然就出现这个错误呢？
这是仿真器驱动的问题么？可是blackhawk这个是随着6678就有的。
请问我应该如何解决呢？
谢谢！
wumengtiankuo zhou：
完整的错误如下：
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the board config pathname(s)]————————————
C:\Users\ADMINI~1\AppData\Local\.TI\213602635\ 0\0\BrdDat\testBoard.dat
—–[Print the reset-command software log-file]—————————–
This utility has selected a 560/2xx-class product.This utility will load the program 'bh560v2u.out'.E_RPCENV_IO_ERROR(-6) No connection: emulator was not foundDownload failed for file C:\ti\ccsv5\ccs_base\common\uscif\xds560v2.out
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06).The title is 'SC_ERR_ECOM_EMUNAME'.
The explanation is:An attempt to access the named emulator via USCIF ECOM has failed.
[End]
