TI中文支持网控制台输出错误：
QMSS successfully initializedCPPI successfully initializedPA successfully initializedHUA version 2.00.00.04
Setting hostname to tidemo-892345MAC Address: 90-D7-EB-09-9F-E9EVM in StaticIP mode at 192.168.2.100
Set IP address of PC to 192.168.2.101
PASS successfully initializedEthernet subsystem successfully initializedEthernet eventId : 48 and vectId (Interrupt) : 7Timeout waiting for reply from PA to Pa_addMac command
ti.sysbios.heaps.HeapMem: line 370: assertion failure: A_invalidFree: Invalid free
xdc.runtime.Error.raise: terminating execution
下面是正常运行时的控制台打印的消息
[C66xx_0] QMSS successfully initializedCPPI successfully initializedPA successfully initializedHUA version 2.00.00.04
Setting hostname to tidemo-892345MAC Address: 90-D7-EB-09-9F-E9EVM in StaticIP mode at 192.168.2.100
Set IP address of PC to 192.168.2.101
PASS successfully initializedEthernet subsystem successfully initializedEthernet eventId : 48 and vectId (Interrupt) : 7Registration of the EMAC Successful, waiting for link up ..
Network Added: If-1:192.168.2.100Service Status: THTTP : Enabled : : 000
想请教以下红色标记的那条错误是什么意思，我在修改里面NAND FLASH读写的功能时，也会出现这个错误
Andy Yin1：
红色标记提示，可能与释放动态内存时传进去的指针参数为空有关。
在每次重新加载测试之前，建议点击system reset会对包括core、qmss及外设的复位，否则是有可能运行出错的。
lucky2：
回复 Andy Yin1:
您好
每次重新加载，点击system reset这样会把DSP主频降为100MHZ吗？
请您看下这个帖子 http://www.deyisupport.com/question_answer/dsp_arm/c6000_multicore/f/53/t/29895.aspx 提及到会降低主频。
如果直接断电重启，应该就不会存在需要system reset了吧。
