TI中文支持网ccs6.0 里编译成功后，debug时好时坏，dsp为28335，仿真器瑞泰创新的xds200u。
配置目标文件里选的是xds 200 usb emulator，TMS320F28335；仿真器驱动应该是装好了，端口里显示xds2xx Emulator CDC Serial Port (COM9) 和xds2xx User CDC Serial Port (10)。
点击debug 后，目标板能连接上，但是无法运行。
test connection为：
An error occurred while soft opening the controller.
—–An error has occurred and this utility has aborted——
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06) .
The title is 'SC_ERR_ECOM_EMUNAME' .
The explanation is:
An attempt to access the named emulator via USCIF ECOM has failed.
另外debug 下拉菜单里有工程名和配置文件（.ccxml），应该点击哪个？有什么区别？
10#：
这个报错信息应该是仿真器驱动或通信存在问题，可能需要跟瑞泰确认是否驱动安装上还有遗漏。
工程名就是调试这个工程，而配置文件是一个调试器的启动，你可以用它调试多个不同的其它工程。
ccs6.0 里编译成功后，debug时好时坏，dsp为28335，仿真器瑞泰创新的xds200u。
配置目标文件里选的是xds 200 usb emulator，TMS320F28335；仿真器驱动应该是装好了，端口里显示xds2xx Emulator CDC Serial Port (COM9) 和xds2xx User CDC Serial Port (10)。
点击debug 后，目标板能连接上，但是无法运行。
test connection为：
An error occurred while soft opening the controller.
—–An error has occurred and this utility has aborted——
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06) .
The title is 'SC_ERR_ECOM_EMUNAME' .
The explanation is:
An attempt to access the named emulator via USCIF ECOM has failed.
另外debug 下拉菜单里有工程名和配置文件（.ccxml），应该点击哪个？有什么区别？
Meng Zhang10：
回复 10#:
重新配置配置文件后，test configuration如下
Test configuration
[Start: Texas Instruments XDS2xx USB Emulator_0]
Execute the command:
%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity
[Result]
—–[Print the board config pathname(s)]————————————
C:\DOCUME~1\ADMINI~1\LOCALS~1\APPLIC~1\TEXASI~1\
CCS\TI\0\0\BrdDat\testBoard.dat
—–[Print the reset-command software log-file]—————————–
This utility has selected a 560/2xx-class product.
This utility will load the program 'xds2xxu.out'.
The library build date was 'May 21 2014'.
The library build time was '18:02:25'.
The library package version is '5.1.507.0'.
The library component version is '35.34.40.0'.
The controller does not use a programmable FPGA.
The controller has a version number of '13' (0x0000000d).
The controller has an insertion length of '0' (0x00000000).
This utility will attempt to reset the controller.
This utility has successfully reset the controller.
—–[Print the reset-command hardware log-file]—————————–
This emulator does not create a reset log-file.
—–[Perform the Integrity scan-test on the JTAG IR]————————
This test will use blocks of 512 32-bit words.
This test will be applied just once.
Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Scan tests: 2, skipped: 0, failed: 0
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 0
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 0
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 0
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 0
All of the values were scanned correctly.
The JTAG IR Integrity scan-test has succeeded.
—–[Perform the Integrity scan-test on the JTAG DR]————————
This test will use blocks of 512 32-bit words.
This test will be applied just once.
Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Scan tests: 2, skipped: 0, failed: 0
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 0
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 0
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 0
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 0
All of the values were scanned correctly.
The JTAG DR Integrity scan-test has succeeded.
[End: Texas Instruments XDS2xx USB Emulator_0]
ccs6.0 里编译成功后，debug时好时坏，dsp为28335，仿真器瑞泰创新的xds200u。
配置目标文件里选的是xds 200 usb emulator，TMS320F28335；仿真器驱动应该是装好了，端口里显示xds2xx Emulator CDC Serial Port (COM9) 和xds2xx User CDC Serial Port (10)。
点击debug 后，目标板能连接上，但是无法运行。
test connection为：
An error occurred while soft opening the controller.
—–An error has occurred and this utility has aborted——
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06) .
The title is 'SC_ERR_ECOM_EMUNAME' .
The explanation is:
An attempt to access the named emulator via USCIF ECOM has failed.
另外debug 下拉菜单里有工程名和配置文件（.ccxml），应该点击哪个？有什么区别？
10#：
回复 Meng Zhang10:
测试连接通过，应该是可以连接，可以调试运行了，现在的问题是什么？
