TI中文支持网
TI专业的中文技术问题搜集分享网站

OMAP138 路径问题

**** Build of configuration Debug for project arm_ceshi ****

D:\ti\ccsv5\utils\bin\gmake -k all'Building file: ../main.c'
'Invoking: ARM Compiler'
"D:/ti/ccsv5/tools/compiler/tms470_4.9.5/bin/cl470" -mv5e –code_state=32 –abi=eabi -me -g –include_path="D:/ti/ccsv5/tools/compiler/tms470_4.9.5/include" –include_path="C:/Users/zhang/workspace_v5_2/arm_ceshi/inc" –include_path="C:/Users/zhang/workspace_v5_2/arm_ceshi/gel" –define=omapl138 –define=omapl137 –diag_warning=225 –display_error_number –preproc_with_compile –preproc_dependency="main.pp" "../main.c"
'Finished building: ../main.c'
' '
'Building target: arm_ceshi.out'
'Invoking: ARM Linker'
"D:/ti/ccsv5/tools/compiler/tms470_4.9.5/bin/cl470" -mv5e –code_state=32 –abi=eabi -me -g –define=omapl138 –define=omapl137 –diag_warning=225 –display_error_number -z –stack_size=0x800 -m"arm_ceshi.map" –heap_size=0x800 -i"D:/ti/ccsv5/tools/compiler/tms470_4.9.5/lib" -i"D:/ti/ccsv5/tools/compiler/tms470_4.9.5/include" –reread_libs –warn_sections –display_error_number –rom_model -o "arm_ceshi.out" "./main.obj" -l"D:\ti\ccsv5\tools\compiler\tms470_4.9.5\lib\libc.a" -l"C:\Users\zhang\workspace_v5_2\arm_ceshi\lib\evmomapl138_bsl.lib" -l"C:\Users\zhang\workspace_v5_2\arm_ceshi\lib\evmomapl138_csl.lib" "../OMAPL138.cmd" "../lib/evmomapl138_bsl.lib" "../lib/evmomapl138_csl.lib"<Linking>

undefined first referenced
symbol in file ——— —————-
EVMOMAPL138_pinmuxConfig ./main.obj GPIO_setDir ./main.obj GPIO_setOutput ./main.obj I2C_init ./main.obj USTIMER_delay ./main.obj USTIMER_init ./main.obj

error #10234-D: unresolved symbols remain

error #10010: errors encountered during linking; "arm_ceshi.out" not built
>> Compilation failure
gmake: *** [arm_ceshi.out] Error 1
gmake: Target `all' not remade because of errors.

**** Build Finished ****

Widic Jane:

另外说一下,我用CCSV5建立arm工程,有两个问题再请教一下:Device endianner  选项little 与big有什么区别?     输出格式eabi(elf)和legi coff 有什么区别 runtime support应该使用哪个?

noaming:

回复 Widic Jane:

Device endianner是DSP中字节的排序方式,ccs中endian的设置要和硬件管脚endian的配置一致即可。

可参考这里解释:

http://blog.csdn.net/sunshine1314/article/details/2309655

noaming:

回复 Widic Jane:

输出格式eabi(elf)和legi coff 的区别,请参考这里:

http://www.deyisupport.com/question_answer/dsp_arm/c6000_multicore/f/53/p/16412/55661.aspx#55661

赞(0)
未经允许不得转载:TI中文支持网 » OMAP138 路径问题
分享到: 更多 (0)