TI中文支持网工程师你好，我在TI官网下载L138的BXL文件，然后使用Ultra Librarian转化为Altium designer格式的封装库，但是在运行脚本文件时，提示如下信息：unexpected symbol ：. ，然后定位到脚本文件的这个位置：pad.X := MilsToCoord(Evaluate(s1)); 。请问是不是你们提供的脚本文件有什么错误，请你们解答？
Tony Tang：
我试了一下，好像没有问题，把产生的文件放在附件了，你试试看能不能用。
说明如下：
Symbol "OMAP-L138_ZWT_361_A" renamed to "OMAP-L138_ZWT_36"Symbol "OMAP-L138_ZWT_361_B" renamed to "OMAP-L138_ZWT_00"Symbol "OMAP-L138_ZWT_361_C" renamed to "OMAP-L138_ZWT_01"Symbol "OMAP-L138_ZWT_361_D" renamed to "OMAP-L138_ZWT_02"Component "OMAP-L138_ZWT_361" renamed to "OMAP-L138_ZWT_36"
Ultra Librarian Lite 5.3.163 Process Report
TextStyle count: 22 Padstack count: 1 Pattern count: 1 Symbol count: 4 Component count: 1
Export
*********************************************************************** Important Instructions Follow ********************************************************************** All files exported to: C:\UltraLibrarian\Library\Exported\Altium\2013-04-27_00-48-18\2013-04-27_00-48-18.txt To import your new library part into Altium follow these steps:
1. After running the Ultra Librarian export for the first time,you will need to copy the following files into an area wherethey can be accessed for all future translations. They are scriptfiles that Altium will need to be able to find. a. UL_Form.dfm b. UL_Form.pas c. UL_Import.pas d. UL_Import.prjScr 2. The above script file will need to be run from within Altium.This can be done by going to File, Open and selecting theUL_Import.PrjScr file stored above.
3. Select the UL_Form.pas file form the new project that has loaded,and then select runfrom the drop down menu. You will need to selectthe form again. Run the form.
3. When the script is run, it will ask you for the file name of theUltra Librarian file to run. You should select the latest fileproduced with a date code (for instance 2010-02-17_23-12-34.txt).
4. The script will open a new Integraged Library project and importthe Ultra Librarian data into it. When complete a message boxwill pop up saying that import is done.
gengxin li：
回复 Tony Tang:
你好，我用你的产生的文件又重新试了一下，还是不行？难道是版本的问题，我的altium designer 10
Eason Wang：
回复 gengxin li:
你在做转换的时候选对目标文件的版本了吗
gengxin li：
回复 Eason Wang:
选对了呀，就是altium designer！
zhigang he1：
回复 gengxin li:
问题解决了吗？我也遇到了，好像是bxl文件问题吧。
gengxin li：
回复 zhigang he1:
通过其他途径找到封装了，不用自己转换
jun fan1：
回复 gengxin li:
能否提供一下您找到的库文件，我也是同样的问题，我的邮箱1020758561@QQ.COM
john EYER：
回复 gengxin li:
请问能否提供一下您找到的L138库文件，我也是同样的问题，一直错误，万分感谢。
我的邮箱：happyjse@163.com
haodong zheng：
我也出现了这样的问题…大家怎么解决的？
haodong zheng：
回复 gengxin li:
能不能给一份 多谢了 894256303@qq.com
