TI中文支持网TMDSHV1PHINVKIT 说明书里说评估板也可以配套F28035 controlcard 。用controlsuite 里 的F28035controlcard 文件CC2803xHWdevPkg_v2_0\R1_2
里的gerber文件做了几个PCB板， 焊了3块样品，链接都出错。。请问是什么问题？
（CCS6.2 版本， xds100V3 下载器，直接通过 TMDSHV1PHINVKIT 的隔离下载口链接下载。下载器经验证没问题，F28035的 3.3V和1.9V供电正常）
An error occurred while hard opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-233' (0xffffff17).
The title is 'SC_ERR_PATH_BROKEN'.
The explanation is:
The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.
An attempt to scan the JTAG scan-path has failed.
The target's JTAG scan-path appears to be broken
with a stuck-at-ones or stuck-at-zero fault.
[End: Texas Instruments XDS100v3 USB Debug Probe_0]
HG：
The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.An attempt to scan the JTAG scan-path has failed.
TMDSHV1PHINVKIT 说明书里说评估板也可以配套F28035 controlcard 。用controlsuite 里 的F28035controlcard 文件CC2803xHWdevPkg_v2_0\R1_2
里的gerber文件做了几个PCB板， 焊了3块样品，链接都出错。。请问是什么问题？
（CCS6.2 版本， xds100V3 下载器，直接通过 TMDSHV1PHINVKIT 的隔离下载口链接下载。下载器经验证没问题，F28035的 3.3V和1.9V供电正常）
An error occurred while hard opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-233' (0xffffff17).
The title is 'SC_ERR_PATH_BROKEN'.
The explanation is:
The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.
An attempt to scan the JTAG scan-path has failed.
The target's JTAG scan-path appears to be broken
with a stuck-at-ones or stuck-at-zero fault.
[End: Texas Instruments XDS100v3 USB Debug Probe_0]
eaglesky lu：
回复 HG:
废话。我自己当然能看到两个句子。 。有没有遇到过类似的问题， 解决问题的建议。。
