TI中文支持网硬件：AM335X ICE V2.1A
load TMDXICE3359_v2_1A.gel出现错误如下：
progress …….CortxA8: Output: DDR PHY DATA0 Register configuration is in progress …….CortxA8: Output: DDR PHY DATA1 Register configuration is in progress …….CortxA8: Output: Setting IO control registers…….CortxA8: Output: EMIF Timing register configuration is in progress …….CortxA8: Trouble Writing Memory Block at 0x4c0000e4 on Page 0 of Length 0x4: (Error -1065 @ 0x3D5A) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 6.0.14.5)AM3359_ICE_Initialization() cannot be evaluated.
Target failed to write 0x4C0000E4
at *((unsigned int *) (0x4C000000+0x0E4))=(unsigned int) 0x07 [TMDXICE3359_v2_1A.gel:281]
at DDR3_EMIF_Config() [TMDXICE3359_v2_1A.gel:374]
at AM3359_ICE_Initialization()
是memory坏片了？请帮分析原因，我该如何解决，谢谢。
fei zhang8：
回复 Yaoming Qin:
我是通过spi启动了，现在问题是我该怎么将spi flash擦除掉啊？现在我是通过下载gel，load isdk_spi_flasher.out按照说明擦除的。
fei zhang8：
回复 Yaoming Qin:
我做了个cpu reset（HW）好了，谢谢
Jian Zhou：
回复 fei zhang8:
如果板子已经运行起来，可以不运行gel，直接运行isdk_spi_flasher.out进行擦除。
