configure: error: liboil-0.3.8 or later is required

在使用ti-processor-sdk-linux-rt-am57xx-evm-05.02.00.10-Linux-x86-Install.bin 开发工具时,

执行1.17 GCC ToolChain时

Configure/Autotools

The last case to cover is one where theenvironment-setup script is useful. In this case we will download thegst-plugins-bad package and configure and build it using the environment-setup script to configure the system for theautotools to properly detect the libraries available as pre-built libraries.

1. First download the gst-plugins-bad-0.10.11.tar.gz package wget http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-0.10.11.tar.gz

   IMPORTANT In order to build the gst-plugins-bad package you will need libglib2.0-dev installed on your system. You can install this usingsudo apt-get install libglib2.0-dev

2. Extract the plugins tarballtar zxf gst-plugins-bad-0.10.11.tar.gz

3. Change directory into the extracted sourcescd gst-plugins-bad-0.10.11

4. Source the<SDK INSTALL DIR>/linux-devkit/environment-setup script to prepare to configure and build the plugins.source <SDK INSTALL DIR>/linux-devkit/environment-setup

5. Now configure the package. We need to define thehost setting to tell the configuration utility what our host system is, and we will also disable some plugins that are known to be bad../configure –host=i686 –disable-deinterlace2 –disable-x264

6. When the configuration is done the last sections will show which plugins will be build based on the libraries available. This is the key point behind what the environment-setup script provides. By setting up the PKG_CONFIG_* paths and other variables the configure script was able to check for required libraries being available to know which plugins to enable. Now that the sources have been configured you can compile them with a simple make command.make

   第5步骤,./configure –host=i686 –disable-deinterlace2 –disable-x264
   

    

   [linux-devkit]:~/TI/soft_Anzhuangbao/gst-plugins-bad-0.10.11> ./configure -host=i686 -disable-deinterlace2 -disable-x264
   configure: WARNING: If you wanted to set the –build type, don't use –host.
       If a cross compiler is detected then cross compile mode will be used.
   configure: loading site script /home/chengh/TI/sitara_linux_sdk/linux-devkit/site-config-armv7ahf-neon-linux-gnueabi
   checking for a BSD-compatible install… /usr/bin/install -c
   checking whether build environment is sane… yes
   checking for a thread-safe mkdir -p… /bin/mkdir -p
   checking for gawk… gawk
   checking whether make sets $(MAKE)… yes
   checking for i686-strip… arm-linux-gnueabihf-strip
   checking nano version… 0 (release)
   checking whether to enable maintainer-specific portions of Makefiles… no
   checking build system type… x86_64-unknown-linux-gnu
   checking host system type… i686-pc-none
   checking for style of include used by make… GNU
   checking for i686-gcc… arm-linux-gnueabihf-gcc
   checking for C compiler default output file name… a.out
   checking whether the C compiler works… yes
   checking whether we are cross compiling… yes
   checking for suffix of executables…checking for suffix of object files… o
   checking whether we are using the GNU C compiler… yes
   checking whether arm-linux-gnueabihf-gcc accepts -g… yes
   checking for arm-linux-gnueabihf-gcc option to accept ISO C89… none needed
   checking dependency style of arm-linux-gnueabihf-gcc… gcc3
   checking for a sed that does not truncate output… (cached) sed
   checking for grep that handles long lines and -e… /bin/grep
   checking for egrep… /bin/grep -E
   checking for fgrep… /bin/grep -F
   checking for ld used by arm-linux-gnueabihf-gcc… /home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld
   checking if the linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) is GNU ld… yes
   checking for BSD- or MS-compatible name lister (nm)… arm-linux-gnueabihf-nm
   checking the name lister (arm-linux-gnueabihf-nm) interface… BSD nm
   checking whether ln -s works… yes
   checking the maximum length of command line arguments… 1572864
   checking whether the shell understands some XSI constructs… yes
   checking whether the shell understands "+="… yes
   checking for /home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld option to reload object files… -r
   checking how to recognize dependent libraries… unknown
   checking for i686-ar… arm-linux-gnueabihf-ar
   checking for i686-strip… (cached) arm-linux-gnueabihf-strip
   checking for i686-ranlib… arm-linux-gnueabihf-ranlib
   checking command to parse arm-linux-gnueabihf-nm output from arm-linux-gnueabihf-gcc object… ok
   checking how to run the C preprocessor… arm-linux-gnueabihf-gcc -E
   checking for ANSI C header files… yes
   checking for sys/types.h… yes
   checking for sys/stat.h… yes
   checking for stdlib.h… yes
   checking for string.h… yes
   checking for memory.h… yes
   checking for strings.h… yes
   checking for inttypes.h… yes
   checking for stdint.h… yes
   checking for unistd.h… yes
   checking for dlfcn.h… yes
   checking for objdir… .libs
   checking if arm-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions… no
   checking for arm-linux-gnueabihf-gcc option to produce PIC… -fPIC -DPIC
   checking if arm-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works… yes
   checking if arm-linux-gnueabihf-gcc static flag -static works… yes
   checking if arm-linux-gnueabihf-gcc supports -c -o file.o… yes
   checking if arm-linux-gnueabihf-gcc supports -c -o file.o… (cached) yes
   checking whether the arm-linux-gnueabihf-gcc linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) supports shared libraries… yes
   checking whether -lc should be explicitly linked in… no
   checking dynamic linker characteristics… no
   checking how to hardcode library paths into programs… immediate
   checking whether stripping libraries is possible… yes
   checking if libtool supports shared libraries… no
   checking whether to build shared libraries… no
   checking whether to build static libraries… yes
   checking whether NLS is requested… yes
   checking for msgfmt… /usr/bin/msgfmt
   checking for gmsgfmt… /usr/bin/msgfmt
   checking for xgettext… /usr/bin/xgettext
   checking for msgmerge… /usr/bin/msgmerge
   checking for ld used by GCC… /home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld
   checking if the linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) is GNU ld… yes
   checking for shared library run path origin… done
   checking for CFPreferencesCopyAppValue… no
   checking for CFLocaleCopyCurrent… no
   checking for GNU gettext in libc… yes
   checking whether to use NLS… yes
   checking where the gettext function comes from… libc
   checking for i686-pkg-config… no
   checking for pkg-config… /home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/bin/pkg-config
   configure: WARNING: using cross tools not prefixed with host triplet
   checking pkg-config is at least version 0.9.0… yes
   checking for VALGRIND… yes
   configure: Using extra code paths for valgrind
   configure: Using GStreamer Bad Plug-ins source release as package name
   configure: Using Unknown package origin as package origin

   configure: *** checking feature: building of plug-ins with external deps ***
   configure: building external plug-ins

   configure: *** checking feature: building of experimental plug-ins ***
   configure: not building experimental plug-ins
   checking whether byte ordering is bigendian… (cached) no
   checking whether byte ordering is bigendian… (cached) no
   checking for i686-gcc… (cached) arm-linux-gnueabihf-gcc
   checking whether we are using the GNU C compiler… (cached) yes
   checking whether arm-linux-gnueabihf-gcc accepts -g… (cached) yes
   checking for arm-linux-gnueabihf-gcc option to accept ISO C89… (cached) none needed
   checking dependency style of arm-linux-gnueabihf-gcc… (cached) gcc3
   checking whether we are using the GNU C++ compiler… yes
   checking whether arm-linux-gnueabihf-g++ accepts -g… yes
   checking dependency style of arm-linux-gnueabihf-g++… gcc3
   checking whether we are using the GNU C++ compiler… (cached) yes
   checking whether arm-linux-gnueabihf-g++ accepts -g… (cached) yes
   checking dependency style of arm-linux-gnueabihf-g++… (cached) gcc3
   checking how to run the C++ preprocessor… arm-linux-gnueabihf-g++ -E
   checking for ld used by arm-linux-gnueabihf-g++… /home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld
   checking if the linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) is GNU ld… yes
   checking whether the arm-linux-gnueabihf-g++ linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) supports shared libraries… no
   checking for arm-linux-gnueabihf-g++ option to produce PIC… -fPIC -DPIC
   checking if arm-linux-gnueabihf-g++ PIC flag -fPIC -DPIC works… yes
   checking if arm-linux-gnueabihf-g++ static flag -static works… yes
   checking if arm-linux-gnueabihf-g++ supports -c -o file.o… yes
   checking if arm-linux-gnueabihf-g++ supports -c -o file.o… (cached) yes
   checking whether the arm-linux-gnueabihf-g++ linker (/home/chengh/TI/sitara_linux_sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/arm-linux-gnueabihf/bin/ld) supports shared libraries… no
   checking dynamic linker characteristics… no
   checking how to hardcode library paths into programs… immediate
   checking for arm-linux-gnueabihf-g++… yes
   checking for i686-objcc… no
   checking for i686-objc… no
   checking for i686-gcc… no
   checking for i686-cc… no
   checking for i686-CC… no
   checking for objcc… no
   checking for objc… no
   checking for gcc… gcc
   checking dependency style of gcc… gcc3
   checking if Objective C compiler works… no
   checking whether arm-linux-gnueabihf-gcc and cc understand -c and -o together… yes
   checking for working do while(0) macros… yes
   checking for valgrind… no
   checking whether to build gtk-doc documentation… no
   checking for gtkdoc-check… no
   configure: Looking for Python version >= 2.1
   checking for python… /usr/bin/python
   checking "/usr/bin/python":… okay
   checking local Python configuration… looks good
   checking whether to build plugin documentation… no (gtk-doc disabled or not available)
   checking for cos in -lm… yes
   checking for stdlib.h… (cached) yes
   checking for unistd.h… (cached) yes
   checking for getpagesize… (cached) yes
   checking for working mmap… (cached) yes
   checking for unistd.h… (cached) yes
   checking sys/time.h usability… yes
   checking sys/time.h presence… yes
   checking for sys/time.h… yes
   checking for stdint types… stdint.h (shortcircuit)
   make use of stdint.h in _stdint.h (assuming C99 compatible system)
   checking for FIONREAD in sys/ioctl.h… yes
   checking if compiler supports gcc-style inline assembly… yes
   checking for socket… yes
   checking for gethostbyname… yes
   checking for GLIB… yes
   checking for LIBOIL… no
   configure: error: liboil-0.3.8 or later is required

   提示,需要安装liboil 0.3.8以上版本, 我从网上下载了0.3.17版本,安装了,再执行这个congfigure命令,仍然提示这个错误.问题到底在哪里,怎么解决?
   

    

Shine：

回复 user4311718:

感谢分享解决方法！