TI中文支持网请教各位，
我用的版本是ImageTuningTool_DM36x_Full_2.2，
做awb tuning时，当设置完参数按下'Tuning'按键，
在AWB_Tuning资料夹下指产生了以下档案:
1. TI_AWB_Calibration_Config.txt,
2. CbCrRGB_addi_ref.txt, CbCrRGB_ref.txt,
3. XXXX_YUV_H3A_SELECTED.txt, XXXX_RGB_H3A_SELECTED.txt, XXXX_RGB_HIGH_RES.txt, XXXX_RGB_H3A.txt,
没看到AWB_config.cfg产生，且在command line 留下以下讯息
——————————————————————–
Checking errors in configuration settings in TI_AWB_Calibration.m…
——————————————————————–
——————————————————————–
No errors found in the configuration settings in TI_AWB_Calibration.m
——————————————————————–
——————————————————————–
Get Data Process Begins
——————————————————————–
Input directory is: .\\
Output directory is: .\\
Total num of ref shots = 4
Ref shots are:
6500, 4800, 4000, 2800,
h3a_col = 12
h3a_row = 32
——————————————————————–
End of processing reference 1
End of processing reference 2
End of processing reference 3
End of processing reference 4
——————————————————————–
DATA Processing Completed Successfully
——————————————————————–
——————————————————————–
DATA Display Begins
——————————————————————–
——————————————————————–
DATA Display Completed Successfully
——————————————————————–
——————————————————————–
DATA Interpolation Begins
——————————————————————–
Warning: Polynomial is badly conditioned. Add points with distinct X
values, reduce the degree of the polynomial, or try centering
and scaling as described in HELP POLYFIT.
> In polyfit at 80
In interp_ref at 37
In AWB_Interpolate at 159
In TI_AWB_Calibration at 316
MSE_1 =NaN
Warning: Polynomial is badly conditioned. Add points with distinct X
values, reduce the degree of the polynomial, or try centering
and scaling as described in HELP POLYFIT.
> In polyfit at 80
In interp_ref at 37
In AWB_Interpolate at 159
In TI_AWB_Calibration at 316
MSE_2 =NaN
Warning: Polynomial is badly conditioned. Add points with distinct X
values, reduce the degree of the polynomial, or try centering
and scaling as described in HELP POLYFIT.
> In polyfit at 80
In interp_ref at 37
In AWB_Interpolate at 159
In TI_AWB_Calibration at 316
MSE_3 =NaN
Warning: Polynomial is badly conditioned. Add points with distinct X
values, reduce the degree of the polynomial, or try centering
and scaling as described in HELP POLYFIT.
> In polyfit at 80
In interp_ref at 37
In AWB_Interpolate at 159
In TI_AWB_Calibration at 316
MSE_4 =NaN
??? Attempted to access temp(1); index out of bounds because numel(temp)=0.
MATLAB:badsubscript
——————————————————————————————————————————————-
设置参数的步骤参考过DM365-Image Tuning Tool User's Guide.pdf
麻烦大家帮帮我，感谢
Chris Meng：
你好，
请问你安装的matlab runtime库是IPNC软件包自带的么？如不是，你使用的版本是？
