TI中文支持网各位工程师，买的EZDSP5515仿真器突然连接不上，上电引导还能用，驱动卸了又装了，换了高版本的CCS，都不好用，test connectiom一直是
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
怀疑是仿真芯片坏了，如果换一块的话，需要相应的XDS100V1 Emulator配置程序吧？请问哪里有配置程序，要怎么用呢？
谢谢
Shine：
板子插到PC后，电脑能识别出板子吗？eZdsp上是xds100V2，你在配置文件里没选成xds100v1吧？
panfei du：
回复 Shine:
你好，板子插上后，PC能识别出来
ccxml文件，试了xds100v1和V2都不行。一直是这个错误
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-151' (0xffffff69).The title is 'SC_ERR_FTDI_OPEN'.
The explanation is:One of the FTDI driver functions used duringthe connect returned bad status or an error.The cause may one or more of: invalid emulator serial number,blank emulator EEPROM, missing FTDI drivers, faulty USB cable.Use the xds100serial command-line utility in the 'common/uscif'folder to verify the emulator can be located.
[End]
仿真芯片摸起来有点热，应该是芯片烧了？ 买一个新的换上能直接用吗？谢谢
Shine：
回复 panfei du:
这个最好跟SDI公司确认一下。http://www.spectrumdigital.com/repairs-and-returns/
panfei du：
回复 Shine:
好的 谢谢
