TI中文支持网
TI专业的中文技术问题搜集分享网站

连接仿真器问题

本来前两天能连上的并能运行程序,但实验过程出了点问题,没有停止程序就断了点。

今天DEBUG连接仿真器的时候出现了以下错误

C28xx: Error connecting to the target: (Error -171 @ 0x0) The wrong controller address value has been used. A controller cannot be detected even though the selected port does match the hardware configuration. (Emulation package 5.1.232.0) 

稍微改动后还会出现342等错误,请问应该怎么解决

Yukun Ma:

这个没遇见过,不过你可以用targetConfigs中的TMS****.ccxml调试一下

本来前两天能连上的并能运行程序,但实验过程出了点问题,没有停止程序就断了点。

今天DEBUG连接仿真器的时候出现了以下错误

C28xx: Error connecting to the target: (Error -171 @ 0x0) The wrong controller address value has been used. A controller cannot be detected even though the selected port does match the hardware configuration. (Emulation package 5.1.232.0) 

稍微改动后还会出现342等错误,请问应该怎么解决

Yi Su1:

回复 Yukun Ma:

编译的结果出现这个

gmake: Nothing to be done for `all'.

本来前两天能连上的并能运行程序,但实验过程出了点问题,没有停止程序就断了点。

今天DEBUG连接仿真器的时候出现了以下错误

C28xx: Error connecting to the target: (Error -171 @ 0x0) The wrong controller address value has been used. A controller cannot be detected even though the selected port does match the hardware configuration. (Emulation package 5.1.232.0) 

稍微改动后还会出现342等错误,请问应该怎么解决

Yi Su1:

回复 Yukun Ma:

和这个错误

Error connecting to the target:(Error -342 @ 0x0)Failure due to the controller command-finish taking too long.(Emulation package 5.1.232.0)

本来前两天能连上的并能运行程序,但实验过程出了点问题,没有停止程序就断了点。

今天DEBUG连接仿真器的时候出现了以下错误

C28xx: Error connecting to the target: (Error -171 @ 0x0) The wrong controller address value has been used. A controller cannot be detected even though the selected port does match the hardware configuration. (Emulation package 5.1.232.0) 

稍微改动后还会出现342等错误,请问应该怎么解决

Seven Han:

回复 Yi Su1:

Yi Su1

编译的结果出现这个

gmake: Nothing to be done for `all'.

本来前两天能连上的并能运行程序,但实验过程出了点问题,没有停止程序就断了点。

今天DEBUG连接仿真器的时候出现了以下错误

C28xx: Error connecting to the target: (Error -171 @ 0x0) The wrong controller address value has been used. A controller cannot be detected even though the selected port does match the hardware configuration. (Emulation package 5.1.232.0) 

稍微改动后还会出现342等错误,请问应该怎么解决

Seven Han:

回复 Yi Su1:

Yi Su1

和这个错误

Error connecting to the target:(Error -342 @ 0x0)Failure due to the controller command-finish taking too long.(Emulation package 5.1.232.0)

赞(0)
未经允许不得转载:TI中文支持网 » 连接仿真器问题
分享到: 更多 (0)