CC2541在OAD升级编译程序时出现的问题

Error[e104]: Failed to fit all segments into specified ranges. Problem discovered in segment BANKED_CODE. Unable to place 74 block(s) (0x1c676 byte(s) total) in0x198a8 byte(s) of memory. The problem occurred while processing the segment placement command"-P(CODE)BANKED_CODE=_CODE_BEG-_CODE_END,_BANK4_BEG-_BANK4_END,_BANK5_BEG-_BANK5_END,_BANK6_BEG-_BANK6_END,_BANK7_BEG-_BANK7_END", where at the moment of placement the available memory ranges were"CODE:3904-3ff7,CODE:4b000-4ffff,CODE:5a64c-5ffff,CODE:68000-6ffff,CODE:78000-7e7ff"

不知道是什么问题，可以解决不

谢谢大家

zhengcai lin：

我也遇到这个问题，请问最后是怎么解决的呢？

user577068187：

是不是代码太大了，我也遇到这个问题了，不知道楼主解决没？分享一下