TI中文支持网DSP烧录过程报错后强行掉电了一次，之后就再也连接不上;
反复测试，上报的错误如下：
Error connecting to the target:
(Error -1156 @ 0x0)
Device may be operating in low-power mode. Do you want to bring it out of this mode? Choose 'Yes' to force the device to wake up and retry the operation. Choose 'No' to retry the operation without waking the device.
(Emulation package 6.0.628.1)
该如何解决？请帮助指教.
Seven Han：
是否有检查一下芯片的供电电压和时钟输出是否正常。
DSP烧录过程报错后强行掉电了一次，之后就再也连接不上;
反复测试，上报的错误如下：
Error connecting to the target:
(Error -1156 @ 0x0)
Device may be operating in low-power mode. Do you want to bring it out of this mode? Choose 'Yes' to force the device to wake up and retry the operation. Choose 'No' to retry the operation without waking the device.
(Emulation package 6.0.628.1)
该如何解决？请帮助指教.
kafei zhang：
回复 Seven Han:
谢谢，是电源出问题了.
