TI中文支持网error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "F2812_ADC_2.out" not built
请问一下这种问题一般是什么原因引起的 为什么编译器分析不出来。还有就为什么把h文件放在workspace里面不行编译还是出现这个问题
Thank you!
引起的
Joey Mao：
回复 mangui zhang:
是的，这样的错误一般是缺少文件，请把完整的Error信息贴上来看看
error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "F2812_ADC_2.out" not built
请问一下这种问题一般是什么原因引起的 为什么编译器分析不出来。还有就为什么把h文件放在workspace里面不行编译还是出现这个问题
Thank you!
引起的
Chao Ma3：
明白了 是因为少了delay的asm文件
error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "F2812_ADC_2.out" not built
请问一下这种问题一般是什么原因引起的 为什么编译器分析不出来。还有就为什么把h文件放在workspace里面不行编译还是出现这个问题
Thank you!
引起的
xipo wang：
回复 Joey Mao:
你好，我的也是这个问题。
**** Build of configuration Debug for project sensor-close ****
"E:\\software\\ccs6\\ccsv6\\utils\\bin\\gmake" -k all 'Building target: sensor-close.out''Invoking: C2000 Linker'"E:/software/ccs6/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/bin/cl2000" -v28 -ml –float_support=fpu32 -g –define="_DEBUG" –define="LARGE_MODEL" –diag_warning=225 –display_error_number –diag_wrap=off -z -m"sensor-close.map" –heap_size=1000 –stack_size=1000 –warn_sections -i"E:/software/ccs6/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/lib" -i"E:/software/ccs6/ccsv6/tools/compiler/ti-cgt-c2000_6.4.2/include" -i"E:/software/ccs6/workspace/sensor-close" -i"D:/楂樺嘲璁″垝/BLDC瀹為獙绠辫祫鏂?BLDC璇曢獙绠变緥绋?sensor-closeloop" –reread_libs –display_error_number –diag_wrap=off –xml_link_info="sensor-close_linkInfo.xml" –entry_point=code_strat –rom_model -o "sensor-close.out" "../CMD/DSP2833x_Headers_nonBIOS.cmd" "./Cap_Init.obj" "./DSP2833x_ADC_cal.obj" "./DSP2833x_Adc.obj" "./DSP2833x_CodeStartBranch.obj" "./DSP2833x_CpuTimers.obj" "./DSP2833x_DefaultIsr.obj" "./DSP2833x_EPwm.obj" "./DSP2833x_GlobalVariableDefs.obj" "./DSP2833x_PieCtrl.obj" "./DSP2833x_PieVect.obj" "./DSP2833x_Sci.obj" "./DSP2833x_SysCtrl.obj" "./DSP2833x_Xintf.obj" "./DSP2833x_usDelay.obj" "./Example_EPwmSetup.obj" "./weizhi.obj" "../CMD/28335_RAM_lnk.cmd" -l"rts2800_fpu32.lib" <Linking>warning #16002-D: build attribute vendor section TI missing in "./Cap_Init.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_ADC_cal.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_Adc.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_CodeStartBranch.obj": compatibility cannot be determined
>> Compilation failurewarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_CpuTimers.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_DefaultIsr.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_EPwm.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_GlobalVariableDefs.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_PieCtrl.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_PieVect.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_SysCtrl.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_Xintf.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./DSP2833x_usDelay.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./Example_EPwmSetup.obj": compatibility cannot be determinedwarning #16002-D: build attribute vendor section TI missing in "./weizhi.obj": compatibility cannot be determined
undefined first referenced symbol in file ——— —————- code_strat
error #10234-D: unresolved symbols remainwarning #10062-D: entry-point symbol "code_strat" undefinederror #10010: errors encountered during linking; "sensor-close.out" not builtgmake: *** [sensor-close.out] Error 1gmake: Target `all' not remade because of errors.
**** Build Finished ****
请问是什么原因啊，楼主说的那个delay函数我这里是有的啊
error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "F2812_ADC_2.out" not built
请问一下这种问题一般是什么原因引起的 为什么编译器分析不出来。还有就为什么把h文件放在workspace里面不行编译还是出现这个问题
Thank you!
引起的
SHIH CIH-HUEI：
回复 xipo wang:
code_strat ??
應該是code_start吧?
error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "F2812_ADC_2.out" not built
请问一下这种问题一般是什么原因引起的 为什么编译器分析不出来。还有就为什么把h文件放在workspace里面不行编译还是出现这个问题
Thank you!
引起的
xu lei xu：
回复 xipo wang:
请问一下您的问题解决了么？我遇到了类似问题，只不过将错误提示中的code_strat变成_InitI2c ！能不能告诉我怎么做？感谢，邮箱是1121938004@qq.com！
