CC2510加PA电路设计CC2592电路

你好，骏晔科技艾伟华，邮箱awh@dreamlnk.com   手机：15818549951  设计CC2510+CC2592模块，已经设计两版本模块。

目前发射功率只有15.8dbm，用smartRF配置成500kbps的时候，距离只有10米左右.RSSi的-60dbm左右就丢包严重。请教

哪里有相应的设计文档请发我邮箱。 模块上面增加了LDO，降低了底噪。

Susan Yang：

很抱歉，目前TI并没有CC2510+CC259x的相关参考设计.您可以参考下CC2538+CC2592的设计，但需要自己做一些修改。

如以下链接所述
e2e.ti.com/…/380754

You may have to do some modifications on the network between CC2510 and CC2592 compared to CC2538+CC2592 due to different PA in the two SoCs. I would add place holders for a series component on the RF_P/RF_N line in addition to the place holder for a component between RF_P and RF_N.

The SMA connector is included to ease conducted measurements. In a design that should be included in a product a F antenna is more practical.