TI中文支持网路由节点可以正常的加入到我的协调器中，并且可以正常的被协调器控制。然后我先将路由节点加入到组id为1的组中也能成功，但使用zclGeneral_SendAddScene来添加情景后，COMMAND_SCENE_VIEW_RSP中的status值是0x85或0x8A,请问下这个status值的具体含义是社么呐？
YiKai Chen：
接收應該是在 zclGeneral_ProcessInScenesServer，建議你調試一下這部份的代碼
Viki Shi：
/*** Error Status Codes ***/#define ZCL_STATUS_SUCCESS 0x00#define ZCL_STATUS_FAILURE 0x01// 0x02-0x7D are reserved.#define ZCL_STATUS_NOT_AUTHORIZED 0x7E#define ZCL_STATUS_MALFORMED_COMMAND 0x80#define ZCL_STATUS_UNSUP_CLUSTER_COMMAND 0x81#define ZCL_STATUS_UNSUP_GENERAL_COMMAND 0x82#define ZCL_STATUS_UNSUP_MANU_CLUSTER_COMMAND 0x83#define ZCL_STATUS_UNSUP_MANU_GENERAL_COMMAND 0x84#define ZCL_STATUS_INVALID_FIELD 0x85#define ZCL_STATUS_UNSUPPORTED_ATTRIBUTE 0x86#define ZCL_STATUS_INVALID_VALUE 0x87#define ZCL_STATUS_READ_ONLY 0x88#define ZCL_STATUS_INSUFFICIENT_SPACE 0x89#define ZCL_STATUS_DUPLICATE_EXISTS 0x8a#define ZCL_STATUS_NOT_FOUND 0x8b#define ZCL_STATUS_UNREPORTABLE_ATTRIBUTE 0x8c#define ZCL_STATUS_INVALID_DATA_TYPE 0x8d#define ZCL_STATUS_INVALID_SELECTOR 0x8e#define ZCL_STATUS_WRITE_ONLY 0x8f#define ZCL_STATUS_INCONSISTENT_STARTUP_STATE 0x90#define ZCL_STATUS_DEFINED_OUT_OF_BAND 0x91#define ZCL_STATUS_INCONSISTENT 0x92#define ZCL_STATUS_ACTION_DENIED 0x93#define ZCL_STATUS_TIMEOUT 0x94#define ZCL_STATUS_ABORT 0x95#define ZCL_STATUS_INVALID_IMAGE 0x96#define ZCL_STATUS_WAIT_FOR_DATA 0x97#define ZCL_STATUS_NO_IMAGE_AVAILABLE 0x98#define ZCL_STATUS_REQUIRE_MORE_IMAGE 0x99
// 0xbd-bf are reserved.#define ZCL_STATUS_HARDWARE_FAILURE 0xc0#define ZCL_STATUS_SOFTWARE_FAILURE 0xc1#define ZCL_STATUS_CALIBRATION_ERROR 0xc2
