CC3200 FTDI 驱动出现问题；求助于TI

   刚购买的CC3200的开发板，然后连接到电脑上，驱动出现如下情况

然后设备如下

Susan Yang：

可以参考TI WIKI页面 http://processors.wiki.ti.com/index.php/CC31xx_%26_CC32xx_FTDI_Flashing 以及 http://www.ftdichip.com/Drivers/D2XX.htm

If your CC3100/CC3200 is not recognized, install the FTDI D2XX driver.

Install the the FT_PROG
Connect the USB cable between the PC and your target board.
Install either CC3200_SDK and/or CC3100_SDK package, depending on what platform you are using.
Open FT_PROG and press F5 (or refresh) to refresh the list of connected FTDI devices.
Right click the device and select erase.
Right click the device choose Apply Template -> From file and choose the corresponding .xml template file from the download section above.
Press Ctrl+P
Reset board by unplugging and plugging USB cable.

user3787631：

回复 Susan Yang:

按照您说的。现在成这个样子了

 

还要我写入什么.ROM的文件，而且IAR也不能烧录了。

 

也不知道这是什么东西