28335仿真时出现以下问题

C28xx: Error: (Error -1041 @ 0xFFFFFF4C) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0)C28xx: Power Failure on Target CPU

3.3V 1.9V供电正常  JTAG引脚焊接没问题

求大佬解惑！感谢~

Seven Han：

试下重启ccs！

C28xx: Error: (Error -1041 @ 0xFFFFFF4C) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0)C28xx: Power Failure on Target CPU

3.3V 1.9V供电正常  JTAG引脚焊接没问题

求大佬解惑！感谢~

Dujie Hao：

回复 Seven Han:

另一块板子是可以的  重启后还是不行 不知道是什么原因 还请解惑。。。

C28xx: Error: (Error -1041 @ 0xFFFFFF4C) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0)C28xx: Power Failure on Target CPU

3.3V 1.9V供电正常  JTAG引脚焊接没问题

求大佬解惑！感谢~

Seven Han：

回复 Dujie Hao:

查看以下jtag连接问题总结：

http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems#Lost_control_of_device_execution_state

C28xx: Error: (Error -1041 @ 0xFFFFFF4C) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0)C28xx: Power Failure on Target CPU

3.3V 1.9V供电正常  JTAG引脚焊接没问题

求大佬解惑！感谢~

Dujie Hao：

回复 Seven Han:

您好 里面没有跟我的问题相关的回答、、、

C28xx: Error: (Error -1041 @ 0xFFFFFF4C) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0)C28xx: Power Failure on Target CPU

3.3V 1.9V供电正常  JTAG引脚焊接没问题

求大佬解惑！感谢~

Frank Lee96：

回复 Dujie Hao:

很大可能就是你的28335芯片没焊好，我之前碰到过这问题，重焊就好了。