Part Number:MSP430FR5729
During the checking of the operability of our finished products in heat conditions, at a temperature of 70℃, a malfunction was detected. As a result of the tests, it was revealed that there is no possibility of information exchange devices using the PLC module, due to a mismatch of the chip
I strongly suggest you post your issue to E2E directly. The relevant R&D engineer will support you directly.
MSP430G2553: 使用定时器TIMER1_A1模拟串行口时，看门狗复位时间就改变了MSP-GANG: 需要文档DRV9xxxx FLASH-Based Family User's Guide（SLAU532），非常感谢MSP-GANG: 需要下载这个文件：DRV9_patch_files.zip，谢谢
MSP430F2618: MSP430F2618芯片不使用外部LFXT1，振荡器一直报故障MSP430F6736: MSP430F6737上电有时候会报IEC60730 CRC test failureMSP430I2041TPWR 用SBW接口无法下载程序
MSP430F2618: DAC12 Fullscale range selection issue. (Power consumption of DAC12 module may be increased due to DAC12IR bit selection)
MSP430FR6043: FRAM 的0x6000-0x63FF段无法擦除
TI中文支持网