Part Number:AM2434
SDK version is mcu_plus_sdk_am243x_08_06_00_48.
I debug rmii pn demo load to cotex_R5,and run , EVM borad two red led(LD22 andLD23) turn on.
Plug in the network cable, the network port light does not light up.
is there any manual to descript how to run PROFINET stack onTMDS243EVM ?
Shine:
可以参考C:\ti\mcu_plus_sdk_am243x_08_03_00_18\docs\industrial_protocol_docs\am243x\profinet_device\index.html文档里的Quickstart – PROFINET Device
,
Cheng Zhijun:
The sdk which version is mcu_plus_sdk_am243x_08_06_00_48 is Siemens Profinet stack,it is different from KUNBUS. I have refer the document about Quickstart – PROFINET Device,but the board didn't work normally.
,
Cheng Zhijun:
My board DeviceType is HSFS
———————–SoC ID Header Info:———————–NumBlocks : 2———————–SoC ID Public ROM Info:———————–SubBlockId : 1SubBlockSize : 26DeviceName : am64xDeviceType : HSFSDMSC ROM Version : [0, 2, 0, 0]R5 ROM Version : [0, 2, 0, 0]———————–SoC ID Secure ROM Info:———————–Sec SubBlockId : 2Sec SubBlockSize : 166Sec Prime : 0Sec Key Revision : 0Sec Key Count : 0Sec TI MPK Hash : b018658ad99dc903c8c9bfb27b12751099920a042ad1dfea7b7ba57369f15546de285edde6a7b39a8bdc40a27b237f8fb1e57f245e80b929c1e28b024aa2ecc6Sec Cust MPK Hash : ad0bc40b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000Sec Unique ID : 74168f15e6e9c7a03a4f895e168e9dd0ccd3949b53caecf327fd12450a89351e
,
Shine:
mcu_plus_sdk_am243x_08_06_00_48里没有profinet example,请问您是跑的哪里的demo?
,
Cheng Zhijun:
TI sent the email that provided the download link of mcu_plus_sdk_am243x_08_06_00_48 with Siemens PN stack.
,
Shine:
请问运行的demo在哪个路径下?log信息有吗?
,
Cheng Zhijun:
demo path:C:\ti\mcu_plus_sdk_am243x_08_06_00_48\examples\industrial_comms\profinet_device_demo
log :
[APP] INFO: Initializing PRU instance … Did Map 0x30080000 len 0x2000 to 0x30080000 (dram0)Did Map 0x30082000 len 0x2000 to 0x30082000 (dram1)Did Map 0x300b4000 len 0x4000 to 0x300b4000 (iram0)Did Map 0x300b8000 len 0x4000 to 0x300b8000 (iram1)Did Map 0x30090000 len 0x10000 to 0x30090000 (shdram)Did Map 0x300a2000 len 0x400 to 0x300a2000 (control0)Did Map 0x300a4000 len 0x400 to 0x300a4000 (control1)Did Map 0x300a0000 len 0x2000 to 0x300a0000 (intc)Did Map 0x300a6000 len 0x2000 to 0x300a6000 (cfg)Did Map 0x300a8000 len 0x2000 to 0x300a8000 (uart0)Did Map 0x300ae000 len 0x2000 to 0x300ae000 (iep)Did Map 0x300b0000 len 0x2000 to 0x300b0000 (ecap0)Did Map 0x300b2000 len 0x400 to 0x300b2000 (mii_rt)Did Map 0x300b2000 len 0x1c00 to 0x300b2000 (mdio)Did Map 0x3008a000 len 0x2000 to 0x3008a000 (txPru0Iram)Did Map 0x3008c000 len 0x2000 to 0x3008c000 (txPru1Iram)Did Map 0x300a5000 len 0x100 to 0x300a5000 (txPru0CtlReg)Did Map 0x300a5000 len 0x100 to 0x300a5000 (txPru1CtlReg)Phy 15 : Disable RGMII modePhy 15 : Disable GBit ANEGPhy 3 : Disable RGMII modePhy 3 : Disable GBit ANEG
Mode: MII
,
Shine:
已咨询e2e产品线工程师,请关注下面帖子的回复。https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1285703/am2434-failed-to-run-profinet-demo
,
Shine:
看到工程师有最新的回复,麻烦回复一下工程师的问题。Apologies for delay in response ,due to holidays. Which boot mode are you using here?