TI中文支持网Part Number:J784S4XEVM
as we know, remoteproc enables trace feature that can be used to show logs from remote cores. Also, remoteproc framework may enable coredump feature.because i saw a source file named "remoteproc_coredump.c" in remoteproc driver source folder, if true, it means that if the target remote core crashed，we can get a coredump file via remoteproc user interface, but now, i don`t how to bing up this feature on system, can somebody tell me? thanks l lot.
Shine：
已咨询e2e产品线工程师，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1262268/j784s4xevm-how-to-enable-core-dump-feature-of-remoteproc-framework
,
Shine：
请关注您在e2e上发布的帖子，工程师将直接回复您发的帖子。
Looks to be a similar question https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1262197/processor-sdk-j784s4-how-to-enable-core-dump-feature-of-remoteproc-framework
I will close this thread .Please follow the above URL .
,
Shine：
请看下面e2e工程师的回复。
The remoteproc coredump is a generic remoteproc subsystem feature, and is part of the overall Remoteproc Error Recovery feature. This also requires that the Linux be notified by remote processors using a variety of mechanisms for crashes, which requires support on the firmware side.
Error Recovery is not supported on any TI K3 remoteproc drivers or SoCs. So, the coredump feature is not available on any of the J721E, J7200, J721S2 or J784S4 SDKs.
