TI中文支持网CDS2XX 仿真器，在仿真下载完成程序后，点击“F8”运行时出现如下错误：
C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Trouble Halting Target CPU: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Unable to determine target status after 20 attempts
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
导致无法仿真。
想问一下这是什么原因造成的？ 怎么样解决？
user4049846：程序存在断点。建议你重启仿真器、重新加载程序，再试一遍。
CDS2XX 仿真器，在仿真下载完成程序后，点击“F8”运行时出现如下错误：
C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Trouble Halting Target CPU: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Unable to determine target status after 20 attempts
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
导致无法仿真。
想问一下这是什么原因造成的？ 怎么样解决？
Susan Yang：请问你您现在有设置断点吗？请您先尝试取消断点，然后重新烧写程序试一下。若是无断点可以正常运行的话，那就有可能是您的代码问题导致了硬件错误。
另外您是否有在官方的开发板上跑一下您的程序以排除您的硬件问题？这中错误也有可能是因为硬件电路尤其是复位电路部分或是电源不稳定导致的。
CDS2XX 仿真器，在仿真下载完成程序后，点击“F8”运行时出现如下错误：
C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Trouble Halting Target CPU: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Unable to determine target status after 20 attempts
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
导致无法仿真。
想问一下这是什么原因造成的？ 怎么样解决？
user1146021：
回复 Susan Yang:
在程序中我没有设置任何断点，程序在官方的开发板上运行也没有问题。 有一个奇怪的现象是： 1、我先跑一个简单的点灯程序（ccs8 中的例程）成功后，再跑刚才那个程序就OK了，没有作任何更改，所以说我个人找不到问题的根因，2、重新上电后，先不跑点灯程序时，又出现上述错误，必须跑一次点灯程序才行。
CDS2XX 仿真器，在仿真下载完成程序后，点击“F8”运行时出现如下错误：
C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Trouble Halting Target CPU: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Error: (Error -1135 @ 0x8467D) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.0.27.9)C28xx_CPU1: Unable to determine target status after 20 attempts
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
导致无法仿真。
想问一下这是什么原因造成的？ 怎么样解决？
Susan Yang：
回复 user1146021:
确实很奇怪,您现在是在官方开发板上烧写时也需要先跑点灯程序吗?
我在E2E上看到了类似的问题，很多都是硬件上的问题。您可以参考一下
e2e.ti.com/…/692336
