TI中文支持网Part Number:IWR6843ISKOther Parts Discussed in Thread: MMWAVEICBOOST
When i try to use the vod_vital_signs Gui with cmd after connected COM port and changed it to my right number, it was open the window as shown in picture,but it don't shown anything
Nancy Wang：
参考以下帖子的讨论看一下是否有帮助：
e2e.ti.com/…/3876243
,
user6372524：
Thanks. I didn't find witch is 'OOB demo' refer to your link. But i tried 'overhead_mount_occupancy' demo,witch is not working well. Then i checked the overhead_VOD_user_guide, it indicates 'divice version' limit(as showm in picture).So i checked my IWR6843ISK EVM, it is '60 GHZi'( an older ES1 device).
Please confirm that whether ‘occupancy_plus_vital_signs’ demo has the same 'divice version' restriction with 'overhead_mount_occupancy' demo.
Thanks!
,
Nancy Wang：
user6372524 说：occupancy_plus_vital_signs
请贴出demo所在的具体toolbox版本，通常都可以在release note中查到适用的芯片版本。
,
user6372524：
toolbox/路径:mmwave_automotive_toolbox_3_6_0\labs\incabinsensing\occupancy_plus_vital_signs
release note 只说明了evm版本，没说divice version
,
Nancy Wang：
Supports mmWave SDK 3.4.0.3
可以通过相应版本的SDK release note来查看。
www.ti.com/…/03.04.00.03
,
user6372524：
查到了要求IWR6843ISK (Rev B)。我手中版本为Rev A.。谢谢。
如图，请问Supported EVM一栏中，”+“是什么含义？“-”是什么含义？
,
Nancy Wang：
user6372524 说：”+“是什么含义？
ISK RevC是可以单独使用的，不需要配合mmWaveICBoost
Only ISK Rev C or later and ISK-ODS Rev B or later can be used in standalone mode.
user6372524 说：“-”是什么含义？
就是解释说明适用于哪个版本的开发板吧。
,
user6372524：
谢谢！
