IWR1642BOOST: 短距离雷达 SRR demo 编译 无法结束

大家好，我在编译SRR DEMO时有时会出现编译无法结束的情况，进度提示在39%左右。下面是编译时的一些输出信息。谢谢！

<Linking>
Finished building target: "srrdemo_16xx_mss.xer4f"
C:/ti/mmwave_sdk_03_05_00_04/packages/scripts/ImageCreator/out2rprc/out2rprc.exe srrdemo_16xx_mss.xer4f srrdemo_16xx_mss.bin
Parsing the input object file, srrdemo_16xx_mss.xer4f.
Appending zeros 0
Appending zeros 256
Appending zeros 83720
File conversion complete!
C:/ti/mmwave_sdk_03_05_00_04/packages/scripts/ImageCreator/multicore_image_generator/MulticoreImageGen.exe LE 37 0x00000006 srrdemo_16xx.bin 0x35510000 srrdemo_16xx_mss.bin 0xb5510000 C:/ti/mmwave_sdk_03_05_00_04/firmware/radarss/xwr16xx_radarss_rprc.bin 0xd5510000 E:/CODE/mmWave Radar/srrdemo_16xx_dss/Debug/srrdemo_16xx_dss.bin

Shine：

请问用的是哪个版本的toolbox?

,

BING NIE：

3.4.0，换了个worksapce重新导入工程就好了

,

Shine：

感谢分享！