如何移除OAD?

SDK: simplelink_cc13x2_26x2_sdk_4_20_01_04

Project: simple_peripheral_oad_offchip_CC26X2R1_LAUNCHXL_tirtos_ccs

在.syscfg文件移除OAD后，如下图：

出现如下错误：

[17:53:40:260]====================
[17:53:40:263]SysCtrlResetSourceGet 4
[17:53:40:263]
[17:53:40:266]SBP Off-chip OAD v0001
[17:53:40:266]OAD failed to open
[17:53:40:274]Initialized
[17:53:40:277]
[17:53:40:314]====================
[17:53:40:318]SysCtrlResetSourceGet 4
[17:53:40:318]
[17:53:40:320]SBP Off-chip OAD v0001
[17:53:40:320]OAD failed to open
[17:53:40:329]Initialized
[17:53:40:329]
[17:53:40:368]====================
[17:53:40:372]SysCtrlResetSourceGet 4
[17:53:40:372]
[17:53:40:373]SBP Off-chip OAD v0001
[17:53:40:376]OAD failed to open
[17:53:40:382]Initialized
[17:53:40:383]
[17:53:40:422]====================
[17:53:40:426]SysCtrlResetSourceGet 4
[17:53:40:426]
[17:53:40:428]SBP Off-chip OAD v0001
[17:53:40:431]OAD failed to open
[17:53:40:436]Initialized
[17:53:40:439]
[17:53:40:476]====================
[17:53:40:479]SysCtrlResetSourceGet 4
[17:53:40:481]
[17:53:40:481]SBP Off-chip OAD v0001
[17:53:40:483]OAD failed to open
[17:53:40:490]Initialized
[17:53:40:491]
[17:53:40:531]====================
[17:53:40:533]SysCtrlResetSourceGet 4
[17:53:40:535]
[17:53:40:535]SBP Off-chip OAD v0001
[17:53:40:540]OAD failed to open
[17:53:40:545]Initialized

注释OAD初始化代码后还是无限重启：

[17:56:49:953]====================
[17:56:49:955]SysCtrlResetSourceGet 4
[17:56:49:959]
[17:56:49:959]Initialized
[17:56:49:962]
[17:56:49:997]====================
[17:56:50:002]SysCtrlResetSourceGet 4
[17:56:50:002]
[17:56:50:002]Initialized
[17:56:50:006]
[17:56:50:043]====================
[17:56:50:045]SysCtrlResetSourceGet 4
[17:56:50:049]
[17:56:50:049]Initialized
[17:56:50:049]
[17:56:50:088]====================
[17:56:50:091]SysCtrlResetSourceGet 4
[17:56:50:094]
[17:56:50:094]Initialized
[17:56:50:094]
[17:56:50:134]====================
[17:56:50:135]SysCtrlResetSourceGet 4
[17:56:50:138]
[17:56:50:138]Initialized
[17:56:50:141]
[17:56:50:179]====================
[17:56:50:180]SysCtrlResetSourceGet 4
[17:56:50:183]
[17:56:50:183]Initialized
[17:56:50:187]
[17:56:50:225]====================
[17:56:50:227]SysCtrlResetSourceGet 4
[17:56:50:230]
[17:56:50:230]Initialized
[17:56:50:233]
[17:56:50:270]====================
[17:56:50:272]SysCtrlResetSourceGet 4
[17:56:50:275]
[17:56:50:275]Initialized
[17:56:50:275]

Kevin Qiu1：

参考这里：e2echina.ti.com/…/193165

YiKai Chen：

直接用沒有OAD的simple_peripheral例程不就好了

Erha：

回复 YiKai Chen:

有自己的OAD方法，需要用到flash驱动，所以没用simple_peripheral例程

Erha：

回复 Kevin Qiu1:

status = GapAdv_enable(advHandleLegacy,GAP_ADV_ENABLE_OPTIONS_USE_MAX, 0);Display_printf(dispHandle, SP_ROW_STATUS_1, 0,"GAP_ADV_ENABLE_OPTIONS_USE_MAX status %d", status);Task_sleep(10000);SIMPLEPERIPHERAL_ASSERT(status == SUCCESS);

注释OAD代码后程序跑到这里就出错了，将 GAP_ADV_ENABLE_OPTIONS_USE_MAX 改为 GAP_ADV_ENABLE_OPTIONS_USE_MAX_EVENTS 可以正常运行，为什么呢？

Kevin Qiu1：

回复 Erha:

出错具体信息是什么，无法正常广播？typedef enum
{/*** Use the maximum possible value. This is the spec-defined maximum for* directed advertising and infinite advertising for all other types*/GAP_ADV_ENABLE_OPTIONS_USE_MAX,/*** Use the user-specified duration*/GAP_ADV_ENABLE_OPTIONS_USE_DURATION,/*** Use the user-specified maximum number of events*/GAP_ADV_ENABLE_OPTIONS_USE_MAX_EVENTS,
} GapAdv_enableOptions_t;

看下这里：e2e.ti.com/…/2685011

Erha：

回复 Kevin Qiu1:

一直重启。

Kevin Qiu1：

回复 Erha:

uint32_t SysCtrlResetSourceGet	(	void)Returns last reset source (including "wakeup from shutdown").Returns
Returns one of the RSTSRC_ defines.
Definition at line 666 of file sys_ctrl.c.

Erha：

回复 Kevin Qiu1:

SysCtrlResetSourceGet=4

Kevin Qiu1：

回复 Erha:

//*****************************************************************************
//
//! \brief Returns the reset source (including "wakeup from shutdown").
//!
//! In case of \ref RSTSRC_WAKEUP_FROM_SHUTDOWN the application is
//! responsible for unlatching the outputs (disable pad sleep).
//! See \ref PowerCtrlPadSleepDisable() for more information.
//!
//! \return Returns the reset source.
//! - \ref RSTSRC_PWR_ON
//! - \ref RSTSRC_PIN_RESET
//! - \ref RSTSRC_VDDS_LOSS
//! - \ref RSTSRC_VDDR_LOSS
//! - \ref RSTSRC_CLK_LOSS
//! - \ref RSTSRC_SYSRESET
//! - \ref RSTSRC_WARMRESET
//! - \ref RSTSRC_WAKEUP_FROM_SHUTDOWN
//! - \ref RSTSRC_WAKEUP_FROM_TCK_NOISE
//
//*****************************************************************************
extern uint32_t SysCtrlResetSourceGet( void );

不清楚你具体注释了哪些代码，只去除OAD部分一般不会出现这个问题，去除OAD没有指导文档，可以直接使用simple_peripheral例程