TI中文支持网你好，我现在遇到的情况是这样，在烧写程序的时候可能电压不稳，导致芯片被锁，现状是仿真器可以连接上芯片
This test will use blocks of 512 32-bit words.
This test will be applied just once.
Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Scan tests: 2, skipped: 0, failed: 0
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 0
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 0
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 0
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 0
All of the values were scanned correctly.
The JTAG DR Integrity scan-test has succeeded.
但是下载调试的时候会出现
C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: E:\fzujiangsir\Project\embadded work\F28027_demo\Debug\demo.out: Load failed.
我现在用的CCS5.5
我找不到帖子里面一些解锁的方式。请问这样的片子还有救吗？
Young Hu：
看样子是锁了，换片子得了
