Hi,I use TPS65070X as Touchscreen Interface,which use Kernel support driver drivers/input/touchscreen/tps6507x-ts.c and drivers/mfd/tps6507x.c ,
when i use AC adapter to povide power to my board,tps65070 touchscreen driver register succefully,but when i use Battery to pvovide,it faild,
tps6507x-ts: probe of tps6507x-ts failed with error -5
s3c-i2c s3c-i2c.0: i2c-0: S3C I2C adapter
my hw staff check tps65070 PMIC power,it is right,so whats the issue? or can give me some advice to ensure hw is OK ?
When use AC adapter to provide Power to board,tps65070 touchscreen driver work find roughly,but some time,my arm11 i2C driver also say -110 error in stop condition.
Liang Sun:
Hi Tommy,
Please have a try to force VREF on by setting bit 4 of ADCONFIG to 1 when using the touchscreen and powering with BAT only on the TPS6507x.
Here is aprevious case: e2e.ti.com/…/106727.aspx
tommy:
回复 Liang Sun:
Thanks,but i also have another issue,
when use battery to provide power to board,I2C can not find PMIC succesfully,I2C -110 timeout error,when use DC ,it can.
Liang Sun:
回复 tommy:
Tommy,
Did the battery use the same input as DC power in the board?
If no, try to use the same input; If yes, detect the waveform for the power supply of the board to check whether they are different.