TI中文支持网
TI专业的中文技术问题搜集分享网站
当前位置：TI中文支持网 > 微处理器 MCU > C2000™ 32位实时 MCU > 正文

F28035使用CCS6.1编译EPWM出错！求大神指导！

2015-08-09 分类：C2000™ 32位实时 MCU 阅读(297)

写了一个三相SPWM的程序，之前的CCS6.0没升级的时候可以编译，之后升级了编译器就不能编译了！

报错 如下：

Description Resource Path Location Type
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 317 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 211 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 227 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 197 C/C++ Problem

关于第二路的初始化程序如下：

void InitEPwm2Example()
{
EPwm2Regs.TBPRD = EPWM2_TIMER_TBPRD; // Set timer period
EPwm2Regs.TBPHS.half.TBPHS = 0x0000; // Phase is 0
EPwm2Regs.TBCTR = 0x0000; // Clear counter

// Setup compare
EPwm2Regs.CMPA.half.CMPA = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);
EPwm2Regs.CMPB = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);

// Setup TBCLK
EPwm2Regs.TBCTL.bit.CTRMODE = TB_COUNT_UPDOWN; // Count up
EPwm2Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Disable phase loading
EPwm2Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // Clock ratio to SYSCLKOUT
EPwm2Regs.TBCTL.bit.CLKDIV = TB_DIV1;

EPwm2Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW; // Load registers every ZERO
EPwm2Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO;
EPwm2Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO;

// Set actions
EPwm2Regs.AQCTLA.bit.CAU = AQ_CLEAR; // Clear PWM1A on CAU
EPwm2Regs.AQCTLA.bit.CAD = AQ_SET; // Set PWM1A on CAD
EPwm2Regs.AQCTLB.bit.CAU = AQ_SET;
EPwm2Regs.AQCTLB.bit.CAD = AQ_CLEAR;

// Active Low PWMs – Setup Deadband
EPwm2Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE;
EPwm2Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC;
EPwm2Regs.DBCTL.bit.IN_MODE = DBA_ALL;
EPwm2Regs.DBRED = EPWM3_DEADBAND;
EPwm2Regs.DBFED = EPWM3_DEADBAND;

// Interrupt where we will change the Deadband
EPwm2Regs.ETSEL.bit.INTSEL = ET_CTR_ZERO; // Select INT on Zero event
EPwm2Regs.ETSEL.bit.INTEN = 1; // Enable INT
EPwm2Regs.ETPS.bit.INTPRD = ET_1ST; // Generate INT on 1st event
}

附加说明：

1.在EPwm2Regs这个寄存器上按F3可以转到 DSP2803x_GlobalVariableDefs.c

2.工程中已经包含了DSP2803x_EPwm.c文件

3.Epwm1和Epwm2的设置完全一样但是没报错

求大神指导！刚刚入门！如果太弱智还请大家谅解哈哈哈

Martin Yu：

看错误提示应该是文件的路径错误，是不是你移动了工程的位置或其他内容？跟编译器相关的路劲不会包含PWM等这些功能模块的头文件的。

写了一个三相SPWM的程序，之前的CCS6.0没升级的时候可以编译，之后升级了编译器就不能编译了！

报错 如下：

Description Resource Path Location Type
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 317 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 211 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 227 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 197 C/C++ Problem

关于第二路的初始化程序如下：

void InitEPwm2Example()
{
EPwm2Regs.TBPRD = EPWM2_TIMER_TBPRD; // Set timer period
EPwm2Regs.TBPHS.half.TBPHS = 0x0000; // Phase is 0
EPwm2Regs.TBCTR = 0x0000; // Clear counter

// Setup compare
EPwm2Regs.CMPA.half.CMPA = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);
EPwm2Regs.CMPB = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);

// Setup TBCLK
EPwm2Regs.TBCTL.bit.CTRMODE = TB_COUNT_UPDOWN; // Count up
EPwm2Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Disable phase loading
EPwm2Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // Clock ratio to SYSCLKOUT
EPwm2Regs.TBCTL.bit.CLKDIV = TB_DIV1;

EPwm2Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW; // Load registers every ZERO
EPwm2Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO;
EPwm2Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO;

// Set actions
EPwm2Regs.AQCTLA.bit.CAU = AQ_CLEAR; // Clear PWM1A on CAU
EPwm2Regs.AQCTLA.bit.CAD = AQ_SET; // Set PWM1A on CAD
EPwm2Regs.AQCTLB.bit.CAU = AQ_SET;
EPwm2Regs.AQCTLB.bit.CAD = AQ_CLEAR;

// Active Low PWMs – Setup Deadband
EPwm2Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE;
EPwm2Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC;
EPwm2Regs.DBCTL.bit.IN_MODE = DBA_ALL;
EPwm2Regs.DBRED = EPWM3_DEADBAND;
EPwm2Regs.DBFED = EPWM3_DEADBAND;

// Interrupt where we will change the Deadband
EPwm2Regs.ETSEL.bit.INTSEL = ET_CTR_ZERO; // Select INT on Zero event
EPwm2Regs.ETSEL.bit.INTEN = 1; // Enable INT
EPwm2Regs.ETPS.bit.INTPRD = ET_1ST; // Generate INT on 1st event
}

附加说明：

1.在EPwm2Regs这个寄存器上按F3可以转到 DSP2803x_GlobalVariableDefs.c

2.工程中已经包含了DSP2803x_EPwm.c文件

3.Epwm1和Epwm2的设置完全一样但是没报错

求大神指导！刚刚入门！如果太弱智还请大家谅解哈哈哈

Kefan Yu：

回复 Martin Yu:

我试过删除这个工程文件然后重新Import了一个EPwmDeadband的工程，然后把代码粘进去还是不可以。

我还安了一个ubuntu，在这上面安了一个ccs6.1也是这个问题。

在别的同学电脑上的ccs5上就可以编译哈哈哈好神奇啊

写了一个三相SPWM的程序，之前的CCS6.0没升级的时候可以编译，之后升级了编译器就不能编译了！

报错 如下：

Description Resource Path Location Type
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 317 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 211 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 227 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 197 C/C++ Problem

关于第二路的初始化程序如下：

void InitEPwm2Example()
{
EPwm2Regs.TBPRD = EPWM2_TIMER_TBPRD; // Set timer period
EPwm2Regs.TBPHS.half.TBPHS = 0x0000; // Phase is 0
EPwm2Regs.TBCTR = 0x0000; // Clear counter

// Setup compare
EPwm2Regs.CMPA.half.CMPA = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);
EPwm2Regs.CMPB = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);

// Setup TBCLK
EPwm2Regs.TBCTL.bit.CTRMODE = TB_COUNT_UPDOWN; // Count up
EPwm2Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Disable phase loading
EPwm2Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // Clock ratio to SYSCLKOUT
EPwm2Regs.TBCTL.bit.CLKDIV = TB_DIV1;

EPwm2Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW; // Load registers every ZERO
EPwm2Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO;
EPwm2Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO;

// Set actions
EPwm2Regs.AQCTLA.bit.CAU = AQ_CLEAR; // Clear PWM1A on CAU
EPwm2Regs.AQCTLA.bit.CAD = AQ_SET; // Set PWM1A on CAD
EPwm2Regs.AQCTLB.bit.CAU = AQ_SET;
EPwm2Regs.AQCTLB.bit.CAD = AQ_CLEAR;

// Active Low PWMs – Setup Deadband
EPwm2Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE;
EPwm2Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC;
EPwm2Regs.DBCTL.bit.IN_MODE = DBA_ALL;
EPwm2Regs.DBRED = EPWM3_DEADBAND;
EPwm2Regs.DBFED = EPWM3_DEADBAND;

// Interrupt where we will change the Deadband
EPwm2Regs.ETSEL.bit.INTSEL = ET_CTR_ZERO; // Select INT on Zero event
EPwm2Regs.ETSEL.bit.INTEN = 1; // Enable INT
EPwm2Regs.ETPS.bit.INTPRD = ET_1ST; // Generate INT on 1st event
}

附加说明：

1.在EPwm2Regs这个寄存器上按F3可以转到 DSP2803x_GlobalVariableDefs.c

2.工程中已经包含了DSP2803x_EPwm.c文件

3.Epwm1和Epwm2的设置完全一样但是没报错

求大神指导！刚刚入门！如果太弱智还请大家谅解哈哈哈

囧：

回复 Kefan Yu:

你有添加F2803x_Epwm.h这个文件吗？在加入的头文件里

写了一个三相SPWM的程序，之前的CCS6.0没升级的时候可以编译，之后升级了编译器就不能编译了！

报错 如下：

Description Resource Path Location Type
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 317 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 211 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 227 C/C++ Problem
identifier "EPwm2Regs" is Example_2803xEPwmDeadBand.c /Example_2803xEPwmDeadBand line 197 C/C++ Problem

关于第二路的初始化程序如下：

void InitEPwm2Example()
{
EPwm2Regs.TBPRD = EPWM2_TIMER_TBPRD; // Set timer period
EPwm2Regs.TBPHS.half.TBPHS = 0x0000; // Phase is 0
EPwm2Regs.TBCTR = 0x0000; // Clear counter

// Setup compare
EPwm2Regs.CMPA.half.CMPA = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);
EPwm2Regs.CMPB = (Uint32)(TimDiv2+sin(0-2*PI/3)*TimDiv2);

// Setup TBCLK
EPwm2Regs.TBCTL.bit.CTRMODE = TB_COUNT_UPDOWN; // Count up
EPwm2Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Disable phase loading
EPwm2Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // Clock ratio to SYSCLKOUT
EPwm2Regs.TBCTL.bit.CLKDIV = TB_DIV1;

EPwm2Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW; // Load registers every ZERO
EPwm2Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO;
EPwm2Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO;

// Set actions
EPwm2Regs.AQCTLA.bit.CAU = AQ_CLEAR; // Clear PWM1A on CAU
EPwm2Regs.AQCTLA.bit.CAD = AQ_SET; // Set PWM1A on CAD
EPwm2Regs.AQCTLB.bit.CAU = AQ_SET;
EPwm2Regs.AQCTLB.bit.CAD = AQ_CLEAR;

// Active Low PWMs – Setup Deadband
EPwm2Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE;
EPwm2Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC;
EPwm2Regs.DBCTL.bit.IN_MODE = DBA_ALL;
EPwm2Regs.DBRED = EPWM3_DEADBAND;
EPwm2Regs.DBFED = EPWM3_DEADBAND;

// Interrupt where we will change the Deadband
EPwm2Regs.ETSEL.bit.INTSEL = ET_CTR_ZERO; // Select INT on Zero event
EPwm2Regs.ETSEL.bit.INTEN = 1; // Enable INT
EPwm2Regs.ETPS.bit.INTPRD = ET_1ST; // Generate INT on 1st event
}

附加说明：

1.在EPwm2Regs这个寄存器上按F3可以转到 DSP2803x_GlobalVariableDefs.c

2.工程中已经包含了DSP2803x_EPwm.c文件

3.Epwm1和Epwm2的设置完全一样但是没报错

求大神指导！刚刚入门！如果太弱智还请大家谅解哈哈哈

Kefan Yu：

回复 囧:

添加了啊！好奇怪

赞(0)
未经允许不得转载：TI中文支持网 » F28035使用CCS6.1编译EPWM出错！求大神指导！
分享到： 更多 (0)
标签：

相关推荐

热门标签

ECTE (3265)#希望得到TI的工程师回答 (1566)C2000WARE (918)DSP (853)希望得到TI工程师回答# (853)盼望能得到TI的人回答 (753)UniFlash (751)TMS320F28335 (750)电源管理 (748)TMS320C6678 (720)【紧急+重要】 (703)技术询问 (691)cc1310 (618)TDA4VM (612)电源 (599)Controlsuite (576)AWR2243 (531)6678 (530)AWR1642 (516)电池管理 (495)【紧急】+重要 (492)sysbios (486)AM5728 (486)CC2640R2F (448)AM3352 (446)#DCA1000EVM (432)放大器 (417)TMS320C6748 (410)bq40z50 (403)28335 (400)

热门文章