TI中文支持网LEDONFC (Bit 11): Enables the LED display to stay on showing charge even after full charge (FC) has
been achieved. With this bit set, the LED will stay on after FC until the LED FC Time has expired.
1 = Enables LED display functionality even under CUV conditions without a charger connected
0 = Disables LED display functionality even under CUV conditions without a charger connected
请问这里是不是写错了
Star Xu：
这部分内容应该没有问题
Typically, once full charge (FC) is achieved, the LEDs are turned-off. If the [LEDONFC] bit is set, then the LEDs will be allowed
to remain on after FC is achieved, if the charger remains connected. The LEDs will remain on after FC for a period defined by
LED FC Time. It is not recommended to leave the LED on for extended periods after FC because of the potential for short
charge / discharge cycling.
YunChao Li：
回复 Star Xu:
谢谢
