ADS1299问题请教

在我们使用ADS1299开发板为单端输入模式时：

我们的跳线配置：JP25：3-4,5-6短接；JP6：1-2，JP7：1-2，JP8：1-2短接；36P引出电极连接脑部，35引出电极连接耳垂作为参考；我们测的波形非常有规律，并非脑波形；

请问：我们的连线是否有误，我们该怎么解决？

注：芯片型号ADS1299EEGFE-PDK

xiansheng zhang：

Mickey Li

Kailyn Chen：

单端输入的正确配置方法在EVM user's guide P17 有描述：www.ti.com.cn/…/slau443b.pdf
1. Set all jumpers to factory defaults as described in Section 2.5.
2. Remove jumpers from pin 5-36 of J6.
3. Short pin 5 and 6 of JP25. Set the SRB1 bit in the MISC1 register to route the SRB1 pin to the
negative input of the channels (refer to Section 8.3 for details). This will route BIAS_ELEC (mid supply)
to the negative inputs of the channels through the SRB1 pin.
4. Provide the single-ended inputs to pins 36, 32, 28, 24, 20, 16, 12, 8 of J6 for channels 1-8 respectively