TI中文支持网ccs5.5
win7 64位系统
评估板上电之后 系统检测不到新硬件 上下两个评估板都是这样
Andy Yin1：
参考如下link设置EVM，看是否能连上仿真器。
http://processors.wiki.ti.com/index.php/TMDXEVM6678L_EVM_Hardware_Setup
hgjku sun：
回复 Andy Yin1:
按说明设置的 PC还是检测不到硬件设备
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the board config pathname(s)]————————————
C:\Users\SunHui\AppData\Local\.TI\693494126\ 0\0\BrdDat\testBoard.dat
—–[Print the reset-command software log-file]—————————–
This utility has selected a 560/2xx-class product.This utility will load the program 'bh560v2u.out'.E_RPCENV_IO_ERROR(-6) No connection: emulator was not foundDownload failed for file C:\ti\ccsv5\ccs_base\common\uscif\xds560v2.out
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06).The title is 'SC_ERR_ECOM_EMUNAME'.
The explanation is:An attempt to access the named emulator via USCIF ECOM has failed.
[End]
Andy Yin1：
回复 hgjku sun:
你使用的是带子卡Blackhawk 560V2仿真器的EVM么，像是硬件连接有问题，没有检测到可用的仿真器连接，需要连接到子卡的mini usb。拍个照看看你的硬件连接。
hgjku sun：
回复 Andy Yin1:
