用的ccs5.5，芯片是6678，仿真器是xds560v2.工程编译完之后，总是提示如下！这个错误跟工程或者ccs设置有关系吗？

编译过去了，但是仿真器连不上了，一直提示如下错误，仿真器是xds560v2.这个错误跟工程或者ccs设置有关系吗？
Error initializing emulator:
(Error -2083 @ 0x0)
Unable to communicate with the emulator. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Emulation package 5.1.232.0)

Shine：

点一下target configuration配置里面的"Test Connection"，看JTAG测试能不能通过？

,

user4343169：

没有test那个选项

,

user4343169：

ccs5的target configuration配置没有"Test Connection"

,

user4343169：

测试结果如下，是仿真器驱动的问题吗？
[Start]

Execute the command:

%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity

[Result]

—–[Print the board config pathname(s)]————————————

C:\Users\ADMINI~1\AppData\Local\.TI\693494126\0\0\BrdDat\testBoard.dat

—–[Print the reset-command software log-file]—————————–

This utility has selected a 560/2xx-class product.
This utility will load the program 'bh560v2u.out'.
E_RPCENV_IO_ERROR(-6) No connection: emulator was not found
Download failed for file C:\ti\ccsv5\ccs_base\common\uscif\xds560v2.out

An error occurred while soft opening the controller.

—–[An error has occurred and this utility has aborted]——————–

This error is generated by TI's USCIF driver or utilities.

The value is '-250' (0xffffff06).
The title is 'SC_ERR_ECOM_EMUNAME'.

The explanation is:
An attempt to access the named emulator via USCIF ECOM has failed.

[End]

,

Shine：

新建Target configuration file了吗？见附件

,

user4343169：

您好，找到了。
测试结果如下，是仿真器驱动的问题吗？
[Start]

Execute the command:

%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity

[Result]

—–[Print the board config pathname(s)]————————————

C:\Users\ADMINI~1\AppData\Local\.TI\693494126\
0\0\BrdDat\testBoard.dat

—–[Print the reset-command software log-file]—————————–

This utility has selected a 560/2xx-class product.
This utility will load the program 'bh560v2u.out'.
E_RPCENV_IO_ERROR(-6) No connection: emulator was not found
Download failed for file C:\ti\ccsv5\ccs_base\common\uscif\xds560v2.out

An error occurred while soft opening the controller.

—–[An error has occurred and this utility has aborted]——————–

This error is generated by TI's USCIF driver or utilities.

The value is '-250' (0xffffff06).
The title is 'SC_ERR_ECOM_EMUNAME'.

The explanation is:
An attempt to access the named emulator via USCIF ECOM has failed.

[End]

,

simon xie：

你好，我也遇到这个问题了，仿真器的驱动也重新安装了，还是这个错误，请问你怎么解决的呢，谢谢，期待你的回复。