TI中文支持网U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 – 13:23:54)
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning – readenv() failed, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
reading uEnv.txt
1672 bytes read in 7 ms (232.4 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc …
Checking if uenvcmd is set …
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd …
reading zImage
4103240 bytes read in 232 ms (16.9 MiB/s)
reading initrd.img
2952617 bytes read in 170 ms (16.6 MiB/s)
reading /dtbs/am335x-boneblack.dtb
25926 bytes read in 13 ms (1.9 MiB/s)
Kernel image @ 0x82000000 [ 0x000000 – 0x3e9c48 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Using Device Tree in place at 88000000, end 88009545
Starting kernel …
Jian Zhou：
请问是用SD卡烧录什么介质？nand还是eMMC
kevin.yang：
回复 Jian Zhou:
Hi,Jian Zhou,
我用的是emmc
Jian Zhou：
回复 kevin.yang:
是按照这个文档做的么：
http://www.deyisupport.com/question_answer/dsp_arm/sitara_arm/f/25/t/73278.aspx
