TI中文支持网请问TMDSICE3359板子如何调试？我用的板子自带的XDS100V2好像调试不了？CCS里显示下载了但是没有反应，尝试了UART basicexample等都没有反应。还是要用starterware？starterware是用做什么的？
另，我现在想用这个板子做一个PROFINET的从机模块，要怎么做？是要把PRU-ICSS-PROFINET-SLAVE加入到sys/bios中吗？怎么加入？
YQ Zhou：
回复 Denny%20Yang99373:
谢谢
YQ Zhou：
回复 Denny%20Yang99373:
请问starterware是用来干嘛的？
YQ Zhou：
回复 Shine:
请问，GEL文件初始化时出错怎么解决？
CortxA8: Trouble Writing Memory Block at 0x4c0000e4 on Page 0 of Length 0x4: (Error -1065 @ 0x3D5A) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 6.0.628.3) AM3359_ICE_Initialization() cannot be evaluated.Target failed to write 0x4C0000E4at *((unsigned int *) (0x4C000000+0x0E4))=(unsigned int) 0x07 [TMDXICE3359_v2_1A.gel:281]at DDR3_EMIF_Config() [TMDXICE3359_v2_1A.gel:374]at AM3359_ICE_Initialization()
论坛看到有人也有同样的错误，说是按照 http://processors.wiki.ti.com/index.php/AM335x_SYSBIOS_Industrial_SDK_Getting_Started_Guide#Launching_and_Debugging_application_in_CCS
擦除FLASH就可以了，但是以上链接中Flashing Binaries to SPI FLASH on ICE V1/V2 USing CCS也需要先完成GEL的AM3359_ICE_Initialization script这一步，要怎么绕过这个GEL初始化擦除FLASH？
