TI中文支持网Dear all
我正在学习AM335x开发板.
软件系统为win7+VMware 15.5 + ubuntu 18.0.4 + ccs9.2,
硬件为ICE_AM335x V1.0B开发板.
现在在win7下的CCS9.2中配置target configuration时可以连接成功,但在ubuntu中的CCS9.2却连接不上,
请问怎样才能解决呀?
谢谢!
jjl3
test_connection_win.txttest_connection_win.txt
Shine：
请问报错信息是什么？看一下是否按照下面的步骤安装ccs的？
software-dl.ti.com/…/ccsv8_linux_host_support.html
yongqing wang：
使用虚拟机安装这个驱动比较麻烦，建议在win7的环境下使用调试器，或者使用非虚拟机的ubuntu系统
jjl3：
回复 Shine:
每一步都显示成功了,但还是有问题,错误如下:
[Start: Texas Instruments XDS100v2 USB Debug Probe_0]
Execute the command:
%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
—–[Print the board config pathname(s)]————————————
/home/jjl3/.ti/ccs920/0/0/BrdDat/testBoard.dat
—–[Print the reset-command software log-file]—————————–
This utility has selected a 100- or 510-class product.This utility will load the adapter 'libjioserdesusb.so'.
An error occurred while soft opening the controller.
—–[An error has occurred and this utility has aborted]——————–
This error is generated by TI's USCIF driver or utilities.
The value is '-151' (0xffffff69).The title is 'SC_ERR_FTDI_OPEN'.
The explanation is:One of the FTDI driver functions used during the connectreturned bad status or an error. The cause may be one ormore of: no XDS100 is plugged in, invalid XDS100 serial number,blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable.Use the xds100serial command-line utility in the 'common/uscif'folder to verify the XDS100 can be located.
[End: Texas Instruments XDS100v2 USB Debug Probe_0]
yongqing wang：
回复 jjl3:
这个错误已经提示了，驱动没装好
jjl3：
回复 yongqing wang:
请问有这方面资料怎么安装吗? linux基本是小白:(
yongqing wang：
回复 jjl3:
你的CCS安装目录下找一个名称叫做install_drivers.sh的脚本，并用sudo 执行它
jjl3：
回复 yongqing wang:
试过了还是不行。
jjl3@jjl3-PC:/usr/local/arm/TI/ccs920/ccs/install_scripts$ sudo ./install_drivers.sh
[sudo] jjl3 的密码：
TI permissions file installation completed successfully. Some distros of Linux
may require a reboot in order for the driver to function properly.For other
distros, restarting udev is sufficient.Restarting udev now …
bh usb560 installation completed successfully.Some versions of Linux
require a reboot in order for the driver to function properly.For other
versions restarting udev is sufficient.Restarting udev now …
Uninstalling /etc/udev/rules.d/99-jlink.rules
JLink installation completed successfully.Some versions of Linux
require a reboot in order for the driver to function properly.For other
versions restarting udev is sufficient.Restarting udev now …
jjl3@jjl3-PC:/usr/local/arm/TI/ccs920/ccs/install_scripts$
yongqing wang：
回复 jjl3:
别用虚拟机
用低版本一点的ubuntu
