TI中文支持网仿真器为：SEED XDS560V2
www.seeddsp.com/showgongju.php
开发板为：TMDXEVM8148，开发商mistralsolutions
www.mistralsolutions.com/…/tmdxevm8148.html
已经根据SEED emulator installation guide成功安装emulator驱动，并在CCS v5 New Target Configuration 中的Connect找到SEED XDS560V2 USB Emulator。
Here is my procedure:
1.Install the emulator driver
2.Choose a project, build it and New a Target Configuration file,
in basic tag, "connection", choose "SEED XDS560V2 USB Emulator". in "Board or Device", choose "EVMDM8148"
in Advanced tag, click C674X_0, in initialization script, choose"PG2.1_DM814X_20Mhz_Si.gel.gel", which is support from Mistral.
click CortexA8, choose the same gel file,
save.
3.Connect the Jtag emulator with PC and board, click "Debug",
4.Debug session launched, then ERROR,
and I can not connect the ARM core, just hint error connecting to the target then go back go the CCS edit perspective.
在CCS v5下Debug，然后提示出错，console错误如下：
Error connecting to the target:
(Error -1146 @ 0x0)
Device ID is not recognized or is not supported by driver.
Confirm device and emulator configuration is correct, or update device driver.
(Emulation package 5.0.681.0)请问Target Configuration中的选项是否正确？
感谢技术支持人员！
Martin Ma：
二楼问题已经解决，集中到了一楼
Martin Ma：
回复 Martin Ma:
顶！
