DM8148 EZSDK例程运行错误

我这边按照如附件里的DM814X EZ 5.03 Software Developer Guide ，测试系统上的EZSDK 5.03上的syslink和Codec Engine模块，遇到如下2个问题。

环境：

开发板：DM8148

System:unbuntu 10.04

EZSDK=ezsdk5_03_01_15

Syslink=syslink 2.00.05.85

按照文档修改MEM：把mem=256M 改成mem=169

（1）按照Page 4中Running the Syslink examples的步骤执行例程messageq，调试终端出现：

Trace enabled

Trace SetFailureReason enabled

Attached to slave procId 0.

Loaded file ./messageq_ti81xx_dsp.xe674 on slave procId 0.

Started slave procId 0.

MessageQApp sample application

Trace enabled

Trace SetFailureReason enabled

Run for all supported proc IDs

Entered MessageQApp_startup

Warning! Unsupported procID specified for running the sample application! proc ID: [1]

Warning! Unsupported procID specified for running the sample application! proc ID: [2]

After Ipc_loadcallback:

status [0x0]

程序停止，无法终止退出，需重启系统。

 

（2）按照Page 5中Running the Codec Engine     examples的步骤执行例程audio1_copy ，调试终端出现：

[t=0x000023ac] [CMEMK Error: Failed to find a pool which fits 1024

tid=0x400c1000] CMEMK Error: Failed to find a pool which fits 1024

xdc.runtime.MainCMEMK Error: Failed to find a pool which fits 1024

: [+2] main> ti.CMEMK Error: Failed to find a pool which fits 128

sdo.ce.examples.CMEMK Error: Failed to find a pool which fits 1024

apps.audio1_copy

[t=0x000025a1] [tid=0x400c1000] xdc.runtime.Main: [+1] App-> Application started, procId DSP engineName remote_copy_DSP input-file ./in.dat output-file ./out.dat.

CMEM Error: getPool: Failed to get a pool fitting a size 1024

CMEM Error: getPool: Failed to get a pool fitting a size 1024

CMEM Error: getPool: Failed to get a pool fitting a size 1024

CMEM Error: getPool: Failed to get a pool fitting a size 128

CMEM Error: getPool: Failed to get a pool fitting a size 1024

[t=0x00009cb3] [tid=0x400c1000] xdc.runtime.Main: [+1] app done.

 

请问以上两个错误该如何解决？请指导下，谢谢！