TI中文支持网将官网cc2650 Simple Peripheral 例程烧录到cc2640f128中不能reset，板子是从某宝买的，之后我自己做的cc2640最小系统也出现同样的问题，将官网cc2650 bluetooth 烧录到cc2640中只能在线编程，一旦从新断电便不能工作，reset之后也不能继续工作，而且断电后电流将从3mA增大到6mA。我想问一下为什么，以及有没有解决的办法？
dongchang gu：
使用cc2640f128 5*5和7*7芯片都不可以reset。在线reset之后没有进入到reset入口，程序跑飞。
dongchang gu：
回复 dongchang gu:
未能进入ResetISR()，程序跑飞。电压正常。
Viki Shi：
CC2650 CC2640的例程是通用的，相同的封装也是引脚兼容的
The multi-standard CC2650 wireless MCU supports BLE as well as other wireless protocols, such as 802.15.4. The CC2640 supports Bluetooth Low Energy only. All code generated from the BLE-Stack 2.0 SDK is binary compatible with both the CC2650 & CC2640. Additionally, IDE project configuration settings in the BLE-Stack v2.0 SDK for CC2650 & CC2640 are cross-compatible; however, it is strongly recommended to not change the CPU settings in the IDE. Although the CC2650 has the HW & ROM capability to support additional wireless protocols, a given SW build can only support one wireless protocol.
dongchang gu：
回复 Viki Shi:
如图所示，图中所有例程烧录到cc2640f128中均可reset（都是没有使用bluetooth功能），但是是用simple_peripheral例程一旦reset之后就搜索不到蓝牙，芯片不工作，无晶振。请问一下这个问题有没有遇到过？
