在IAR中在线下载CC1310F128程序提示错误

在IAR中在线下载官方提供的simplelink_cc13x0_sdk_2_10_00_36例程，使用的下载器为XDS110，提示错误：

YiKai Chen：

請問你使用的例程，還有IAR版本？另外，你硬體是用TI LAUNCHXL-CC1310?

Zhi Chen：

回复 YiKai Chen:

1、例程使用的是：simplelink_cc13x0_sdk_2_10_00_36\examples\nortos\CC1310_LAUNCHXL\drivers\uartecho
2、IAR版本：8.20.2
3、硬件使用的是：根据官网提供的文档LAUNCHXL-CC1310_1_3_0_Schematic.pdf，自己画的板子

Susan Yang：

有没有运行过 C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0_2\arm\drivers\ti-xds试试？

Zhi Chen：

回复 Susan Yang:

运行了，然后还将运行时安装目录添加到了下图中：

Susan Yang：

回复 Zhi Chen:

建议您按照 netstorage.iar.com/…/csxds.ENU.html 操作：

But in case you need to install any driver manually following steps are done:
If you are using TI XDS100/110/200 emulator, you must have the version of the TI emupack provided with this release of EWARM installed in the suggested directory C:\ti.

The TI emupack installer is located in the arm\drivers\ti-xds directory of the EWARM installation.
Note: To install the TI emupack you must have full administrative rights on your computer. To achive this you have to do Run as administrator when starting the installer.

The following USB drivers are included in the TI emupack installation, and will be installed in your system as part of the installation procedure:

For TI XDS110, USB drivers are found in the C:\ti\ccs_base\emulation\windows\xds110_drivers directory.
For TI XDS100, USB drivers are found in the C:\ti\ccs_base\emulation\windows\xds100_drivers directory.
For TI XDS200, USB drivers are found in the C:\ti\ccs_base\emulation\windows\xds2xx_drivers directory.

For some TI XDS110 boards, you need to explicitly install the USB driver in the arm\drivers\StellarisICDI directory of the EWARM installation. This USB driver is also possible to install during the installation of the EWARM.

da qin zheng sheng：

你做的板子可以在programmer2环境识别不?

da qin zheng sheng：

回复 da qin zheng sheng:

还有仿真工具驱动安装成功了没有?

Zhi Chen：

回复 da qin zheng sheng:

可以的，在SmartRF Flash Programmer 2中hex文件能下载成功，但是在IAR中直接下载和调试就提示出错。