C28xx: Error: (Error -1041 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5) C28xx: Trouble Reading Register RPC: (Error -1041 @ 0x14)

用的是TI公司的FOC控制电机转速的项目，芯片可以正常运行，但是当我用示波器测波形时总是出现以下错误。

C28xx: Error: (Error -1041 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)C28xx: Trouble Reading Register RPC: (Error -1041 @ 0x14) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)

Seven Han：

您好，

请问使用的是哪颗芯片？板子是TI的EVM板吗？

用的是TI公司的FOC控制电机转速的项目，芯片可以正常运行，但是当我用示波器测波形时总是出现以下错误。

C28xx: Error: (Error -1041 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)C28xx: Trouble Reading Register RPC: (Error -1041 @ 0x14) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)

user4972580：

回复 Seven Han:

用的是STM320F28335

用的是TI公司的FOC控制电机转速的项目，芯片可以正常运行，但是当我用示波器测波形时总是出现以下错误。

C28xx: Error: (Error -1041 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)C28xx: Trouble Reading Register RPC: (Error -1041 @ 0x14) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)

Seven Han：

回复 user4972580:

可能仿真器异常，JTAG connector部分电路是怎么设计的呢？

可以参考原理图C:\ti\controlSUITE\development_kits\~controlCARDs\CC2833xHWdevPkg

用的是TI公司的FOC控制电机转速的项目，芯片可以正常运行，但是当我用示波器测波形时总是出现以下错误。

C28xx: Error: (Error -1041 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)C28xx: Trouble Reading Register RPC: (Error -1041 @ 0x14) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 6.0.14.5)

Young Hu：

这个是示波器探头接触相关测试点的时候干扰到电源或者JTAG的信号了。建议：

1. 采用隔离的仿真器；

2. 仿真器的USB线上加磁环。