zigbee 3.0.2 会卡在ZMacInit(); 应该是硬件晶振问题，但如何修改代码？

我zigbee模块是cc2530,P2.3和P2.4没有接32K晶振，导致了协议栈一直卡死在ZMacInit函数中，该如何解决这个问题呢？感谢

Viki Shi：

hal_board_cfg.h文件，默认外部32块晶振 // Values based on powerup h/w config as input with pull-up – not using dynamic cfg of transport. #define ZNP_CFG0_32K_XTAL 1 /* 32kHz crystal installed and used */ #define ZNP_CFG0_32K_OSC 0 /* 32kHz crystal not installed; internal osc. used */ #define ZNP_CFG1_SPI 1 /* use SPI transport */ #define ZNP_CFG1_UART 0 /* use UART transport */ #define ZNP_CFG1_UART_USB 2 /* definition required for CC2531 compatibility */ extern unsigned char znpCfg1; extern unsigned char znpCfg0;

#define OSC_32KHZ 0x00 /* external 32 KHz xosc */#else#define OSC_32KHZ 0x80 /* internal 32 KHz rcosc */#endif#endif