TI中文支持网
TI专业的中文技术问题搜集分享网站

LM Flash programmer 问题

LM Flash programmer1583是不是不支持tiva的网络下载应用程序呀?哪个版本支持呀?谢谢!

The Ethernet Interface is a network interface.  An Ethernet connection can be established directly from the PC to the Ethernet enabled Stellaris evaluation board or by connecting both the PC and the evaluation board to a LAN.

You can use the Ethernet Interface to program the internal flash of the Stellaris microcontroller. The utilities from the Flash Utilities tab and Other Utilities tab are not available when the Ethernet Interface is selected.

Note: A properly configured boot loader needs to be programmed into the internal flash ofthe Stellaris microcontroller, or a device with a ROM-enabled boot loader must be selected, prior to programming with the Ethernet Interface. The Ethernet boot loader implements a BOOTP server and LM Flash Programmer implements a BOOTP client.  For more information about the boot loader, or to determine which devices support ROM boot loaders, visit Stellaris on TI at

xyz549040622:

LM Flash programmer我记得好像只支持串口下载吧,网口更新好像需要你自己烧写boot的

jingjiao wang:

回复 xyz549040622:

我下了boot到FLASH里,能用LM Flash programmer用UART更新应用程序,但是用网络无法更新应用程序,以前用M3(lm3s9b96)是可以的。在LM Flash programmer的帮助文档里看到了这句话:You can use the Ethernet Interface to program the internal flash of the Stellaris microcontroller. The utilities from the Flash Utilities tab and Other Utilities tab are not available when the Ethernet Interface is selected.好像没有Tiva  microcontroller 。

You can use the Uart Interface to program the internal flash of the Stellaris microcontroller or Tiva  microcontroller 。

这个软件LM Flash programmer是不是不支持Tiva  microcontroller 用网络更新应用程序呀(bootloader)?

谢谢!

HG:

回复 jingjiao wang:

TIVA也可以

yukun zhu:

回复 jingjiao wang:

您好。我的TM4出现了无法少些代码情况。想请教您要怎么用这个LM FLASH programmer

xyz549040622:

回复 yukun zhu:

无法少写提示什么呢,你用的什么硬件烧写的,软件呢?可以尝试先解锁试试。

赞(0)
未经允许不得转载:TI中文支持网 » LM Flash programmer 问题
分享到: 更多 (0)