TI中文支持网Part Number:AWR2944EVMOther Parts Discussed in Thread:AWR2944
调试时报下面错误：
Debug: Launching the MMW Demo on MSS
**********************************************
Debug: Launched the Initialization Task
BSS is powered up…
Debug: mmWave Control Initialization was successful
Debug: mmWave Control Synchronization was successful
==========================
CPSW LWIP SIMPLE SOCKET==========================
EnetPhy_bindDriver: PHY 0: OUI:080028 Model:23 Ver:01 <-> 'dp83867' : OK
PHY 0 is alive
task creation failedASSERT: 0.41665s: /nightlybuilds/mcupsdk_internal/jenkins/mcu_plus_sdk_awr294x_09_00_00_15/source/networking/lwip/lwip-port/freertos/src/sys_arch.c:sys_thread_new:494: 0 failed !!!
角雷达工程路径如下：
C:\ti\radar_toolbox_2_20_00_05\source\ti\examples\ADAS\high_end_corner_radar
参考的以太网demo路径如下：
C:\ti\mmwave_mcuplus_sdk_04_04_01_02\mcu_plus_sdk_awr294x_09_00_00_15\examples\networking\lwip\enet_cpsw_udpclient
这个错误出现在tcpip_init中，请问是否与syscfg中的MPU ARMv7的配置有关？如何解决？
Chris Meng：
你好，
AWR2944 mmw demo有支持eth的，你能用这个demo参考么？
Thanks,
Chris
,
l p：
感谢回复，请问路径可以发一下吗？
,
l p：
您好，之前的问题已解决，出现下面问题，跑原始角雷达工程也会出现下面的问题：
[Cortex_R5_0] **********************************************Debug: Launching the MMW Demo on MSS**********************************************Debug: Launched the Initialization TaskBSS is powered up…**********************************************Debug: Launching the MMW Demo on MSS**********************************************Debug: Launched the Initialization TaskBSS is powered up…Debug: mmWave Control Initialization was successfulDebug: mmWave Control Synchronization was successfulASSERT: 0.26133s: ../demo/mss/mss_main.c:MmwDemo_eventCallbackFxn:2369: 0 failed !!!
,
Chris Meng：
你好，
新问题请另起一个帖子询问。
Thanks，
Chris
