TI中文支持网Part Number:TMS320F28034Other Parts Discussed in Thread:CONTROLSUITE
我在使用 controlSUITE 中的flash例程来熟悉flash api（例程路径C:\ti\controlSUITE\device_support\f2803x\v130\DSP2803x_examples_ccsv5\flash_programming），发现在使用Flash_Program对flash进行写入时失败，状态码为30。例程中运行的Example_CsmUnlock、Flash_APIVersionHex 、Flash_APIVersion、Flash_Erase等api都正常。
我未对例程代码有做任何修改，仅仅基于F28034.cmd做了修改将api放入ram处理，想问一下这种情况该如何解决？
/* F28034.cmd
// TI File $Revision: /main/4 $
// Checkin $Date: November 9, 200915:09:14 $
//###########################################################################
//
// FILE: F28034.cmd
//
// TITLE: Linker Command File For F28034 Device
//
//###########################################################################
// $TI Release: 2803x Internal Release 2 $
// $Release Date: November 11, 2008 $
//###########################################################################
*/
/* ======================================================
// For Code Composer Studio V2.2 and later
// ---------------------------------------
// In addition to this memory linker command file,
// add the header linker command file directly to the project.
// The header linker command file is required to link the
// peripheral structures to the proper locations within
// the memory map.
//
// The header linker files are found in <base>\DSP2803x_Headers\cmd
//
// For BIOS applications add:DSP2803x_Headers_BIOS.cmd
// For nonBIOS applications add:DSP2803x_Headers_nonBIOS.cmd
========================================================= */
/* ======================================================
// For Code Composer Studio prior to V2.2
// --------------------------------------
// 1) Use one of the following -l statements to include the
// header linker command file in the project. The header linker
// file is required to link the peripheral structures to the proper
// locations within the memory map*/
/* Uncomment this line to include file only for non-BIOS applications */
/* -l DSP2803x_Headers_nonBIOS.cmd */
/* Uncomment this line to include file only for BIOS applications */
/* -l DSP2803x_Headers_BIOS.cmd */
/* 2) In your project add the path to <base>\DSP2803x_headers\cmd to thelibrary search path under project->build options, linker tab,library search path (-i).
/*========================================================= */
/* Define the memory block start/length for the F28034PAGE 0 will be used to organize program sectionsPAGE 1 will be used to organize data sectionsNotes:Memory blocks on F2803x are uniform (ie samephysical memory) in both PAGE 0 and PAGE 1.That is the same memory region should not bedefined for both PAGE 0 and PAGE 1.Doing so will result in corruption of programand/or data.L0 memory block is mirrored - that isit can be accessed in high memory or low memory.For simplicity only one instance is used in thislinker file.Contiguous SARAM memory blocks or flash sectors can bebe combined if required to create a larger memory block.
*/
MEMORY
{
PAGE 0:/* Program Memory *//* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE1 for data allocation */RAML0: origin = 0x008000, length = 0x000800/* on-chip RAM block L0 */RAML1: origin = 0x008800, length = 0x000400/* on-chip RAM block L1 */OTP: origin = 0x3D7800, length = 0x000400/* on-chip OTP */FLASHH: origin = 0x3E8000, length = 0x002000/* on-chip FLASH */FLASHG: origin = 0x3EA000, length = 0x002000/* on-chip FLASH */FLASHF: origin = 0x3EC000, length = 0x002000/* on-chip FLASH */FLASHE: origin = 0x3EE000, length = 0x002000/* on-chip FLASH */FLASHD: origin = 0x3F0000, length = 0x002000/* on-chip FLASH */FLASHC: origin = 0x3F2000, length = 0x002000/* on-chip FLASH */FLASHA: origin = 0x3F6000, length = 0x001F80/* on-chip FLASH */CSM_RSVD: origin = 0x3F7F80, length = 0x000076/* Part of FLASHA. Program with all 0x0000 when CSM is in use. */BEGIN: origin = 0x3F7FF6, length = 0x000002/* Part of FLASHA. Used for "boot to Flash" bootloader mode. */CSM_PWL_P0 : origin = 0x3F7FF8, length = 0x000008/* Part of FLASHA. CSM password locations in FLASHA */IQTABLES: origin = 0x3FE000, length = 0x000B50/* IQ Math Tables in Boot ROM */IQTABLES2: origin = 0x3FEB50, length = 0x00008C/* IQ Math Tables in Boot ROM */IQTABLES3: origin = 0x3FEBDC, length = 0x0000AA/* IQ Math Tables in Boot ROM */ROM: origin = 0x3FF27C, length = 0x000D44/* Boot ROM */RESET: origin = 0x3FFFC0, length = 0x000002/* part of boot ROM */VECTORS: origin = 0x3FFFC2, length = 0x00003E/* part of boot ROM */
PAGE 1 :/* Data Memory *//* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE0 for program allocation *//* Registers remain on PAGE1*/BOOT_RSVD: origin = 0x000000, length = 0x000050/* Part of M0, BOOT rom will use this for stack */RAMM0: origin = 0x000050, length = 0x0003B0/* on-chip RAM block M0 */RAMM1: origin = 0x000400, length = 0x000400/* on-chip RAM block M1 */RAML2: origin = 0x008C00, length = 0x000400/* on-chip RAM block L2 */RAML3: origin = 0x009000, length = 0x001000/* on-chip RAM block L3 */FLASHB: origin = 0x3F4000, length = 0x002000/* on-chip FLASH */
}
/* Allocate sections to memory blocks.Note:codestart user defined section in DSP28_CodeStartBranch.asm used to redirect codeexecution when booting to flashramfuncs user defined section to store functions that will be copied from Flash into RAM
*/
SECTIONS
{/* Allocate program areas: */.cinit: > FLASHAPAGE = 0.pinit: > FLASHA,PAGE = 0.text: > FLASHAPAGE = 0codestart: > BEGINPAGE = 0ramfuncs: LOAD = FLASHA,RUN = RAML0,LOAD_START(_RamfuncsLoadStart),LOAD_END(_RamfuncsLoadEnd),RUN_START(_RamfuncsRunStart),PAGE = 0
Flash28_API:{-lFlash2803x_API_V100.lib(.econst)-lFlash2803x_API_V100.lib(.text)}LOAD = FLASHA,RUN = RAML0,LOAD_START(_Flash28_API_LoadStart),LOAD_END(_Flash28_API_LoadEnd),RUN_START(_Flash28_API_RunStart),PAGE = 0csmpasswds: > CSM_PWL_P0 PAGE = 0csm_rsvd: > CSM_RSVDPAGE = 0/* Allocate uninitalized data sections: */.stack: > RAMM0PAGE = 1.ebss: > RAML2PAGE = 1.esysmem: > RAML2PAGE = 1/* Initalized sections go in Flash *//* For SDFlash to program these, they must be allocated to page 0 */.econst: > FLASHAPAGE = 0.switch: > FLASHAPAGE = 0/* Allocate IQ math areas: */IQmath: > FLASHAPAGE = 0/* Math Code */IQmathTables: > IQTABLES,PAGE = 0, TYPE = NOLOAD/* Uncomment the section below if calling the IQNexp() or IQexp()functions from the IQMath.lib library in order to utilize therelevant IQ Math table in Boot ROM (This saves space and Boot ROMis 1 wait-state). If this section is not uncommented, IQmathTables2will be loaded into other memory (SARAM, Flash, etc.) and will takeup space, but 0 wait-state is possible.*//*IQmathTables2: > IQTABLES2, PAGE = 0, TYPE = NOLOAD{IQmath.lib<IQNexpTable.obj> (IQmathTablesRam)}*//* Uncomment the section below if calling the IQNasin() or IQasin()functions from the IQMath.lib library in order to utilize therelevant IQ Math table in Boot ROM (This saves space and Boot ROMis 1 wait-state). If this section is not uncommented, IQmathTables2will be loaded into other memory (SARAM, Flash, etc.) and will takeup space, but 0 wait-state is possible.*//*IQmathTables3: > IQTABLES3, PAGE = 0, TYPE = NOLOAD{IQmath.lib<IQNasinTable.obj> (IQmathTablesRam)}*//* .reset is a standard section used by the compiler. It contains the *//* the address of the start of _c_int00 for C Code./*/* When using the boot ROM this section and the CPU vector *//* table is not needed. Thus the default type is set here to *//* DSECT */.reset: > RESET,PAGE = 0, TYPE = DSECTvectors: > VECTORSPAGE = 0, TYPE = DSECT
}
/*
//===========================================================================
// End of file.
//===========================================================================
*/
Lydia：
您好，
感谢您对TI产品的关注！为更加有效地解决您的问题，我们建议您将问题发布在E2E英文技术论坛上（https://e2e.ti.com/p/addpost），将由资深的英文论坛工程师为您提供帮助。
